96 jeep grand cherokee headliner

Jeep Crank Sensor Replacement, P Codes P0351, P1391 ...

? 6:24
www.youtube.com/watch?v=7D0vUEDSwXo
May 12, 2013 - Uploaded by Robert DIY Replaced the crank sensor on this 2003 Jeep Grand Cherokee.... to replace my crankshaft position sensor on my 1998 grand cherokee laredo.

Jeep Crankshaft Position Sensor Replacement (CKP, CKPS ...

? 4:07
www.youtube.com/watch?v=1Ho5iAKQV00

Oct 27, 2013 - Uploaded by WeekendHandymen
hi , do you think if I replace crank sensor will solve the problem ,my jeep .... Where's the crankshaft located in 99 jeep grand Cherokee laredo .

did you adjust the idler pully, to tighten up the belt?

try dissconnecting the pos termenal of your battery for 2 min.

Have the wheel hub bearings checked.

Here's the link and I'm sure you will get the solution of your problem 1996 Jeep Grand Cherokee Service Repair Manual INSTANT DOWNLOAD

You can try to use the spray contact adhesive

there is a company called quadratec they make cool stuff for jeeps. go one the web and look it up. cherokee's Grands and wranglers. they have alot of stuff to make the jeep look good. and replacement panels and plastic and diamond plate trim. enjoy.

front - 6.5" by 6.5" depth- 3"

in dash - 3.5" depth- 2"

back- 6.5" by 6.5" depth- 3"

the simple fix might be the park interlock cable. this locks the shifter unless you press and hold the brake pedal while selecting gears. I've seen and replaced a few of these on several chrysler/dodge vehicles.

the sensor is located right above the oil filter, careful they crack very easily...but are really easy to replace...