I have a 2003 Jaguar S-Type and am looking to replace a lost 'switchblade' key fob. I am looking to pick one up cheap off of eBay and was wondering if I can get instructions on how to reprogram the 'new' key fob without taking my car to the dealer and spending big $$$.
The switchblade key would need to be compatable with your ignition switch barrel. Only normally available from jag dealers who check the Jag owners register before supplying you a replacement.
The older type seperate fobs could be programmed by switching the ignition on and off 8 times (allowing all functions to settle) and on the 9th switch on - press a button on each fob and then switch off. to test use a good fob to lock the car then try the reprogammed fob to unlock/lock. Sometimes this works first time - sometimes needs a couple of tries.
X type, XK ,XJ can be done manually but not Stype unfortunately. Should take less than 15 mins to do
The s type key blade has a chip inside even if the key fits and turns the key transponder module will think it is the incorrect key and will not start the car the security system has to be programmed by diagnostic equipment to accept the new key, the plip part can be done at the same time you will need all the keys or the others will be deleted you need to find someone with wds or ids diagnostic equipment
Call 561-296-1234 their programming start from $85.00
4,289 views
Usually answered in minutes!
Is there a reason why not the S-Type? Should take less than 15 minutes to do what, reprogram the fob at the dealership?
Need second key and fob
Need to have keys cut need code key to make them without an original key. Is the code key in the vin number
×