Question about 2002 Ford Windstar Cargo

1 Answer

Fuel pressure I need to kmow what the propper Fuel pressure is for a 2002 Ford Windstar 3.8

Posted by gstrong139 on


1 Answer


  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Key on engine off 35 to 45 psi
engine running 28 to 45 psi

Posted on Mar 21, 2009


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 96 Ford windstar was running just died in the middle of the street I bought a computer thinking that was the problem it cranks but won't fire

Ford Windstar Starting/Stalling Problems - > Ford > Ford Windstar

Oct 16, 2007 - 31 posts - ‎26 authors
Learn more about Ford Windstar at the Car Forums! ... Then on Friday it died while I was driving down the street. ... I have a 3.8L v6 1996 Ford Windstar. .... Then yesterday the car just died while driving and had to be towed back to .... The engine will crank, start run about 5 seconds then stop.

Fixing A Car That Randomly Dies While Driving - YouTube

? 3:59
Jul 20, 2010 - Uploaded by Scotty Kilmer
Fixing A Car That Randomly Dies While Driving. Scotty Kilmer ...Just check it out at ...

2002 Ford Windstar Engine Stalls/Shuts Down While Driving ...
The 2002 Ford Windstar has 11 complaints for engine stalls/shuts down while driving. ... 2002 Windstar just starting shutting off in the middle of driving. ... The engine diesupon acceleration and will crank but won't start unless switch is ... Inspected the Fuel Pump shut-off Switch, Fuel Filter, Run several full tanks of gas ...

Jan 26, 2016 | Ford Cars & Trucks

1 Answer

Must crank 10 -15 x's before engine starts. i checked fuel rail for both fuel and pressure. both are present however couldnt determine how much pressure. 95 f. windstar any suggestions appreciated

i would try to cycle the key a couple or 3 times on and off before starting it.. how long has it been since the fuel filter was changed?? might be getting restriction from it.

Dec 01, 2010 | 1995 Ford Windstar

1 Answer

Failed OBDII Diagnstic trouble codes P0761 and O1744 What does this mean?

code P0761-
Possible causes - Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 3 valve
- Shift solenoid 3 valve harness or connectors
- Shift solenoid 3 valve circuit is open or shorted
P0761 FORD Description Shift solenoid valve 3 is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position. When is the code detected? The P0761 code is detected when the ECM has detected a mechanical fault with the solenoid energized, valve stuck off code O1744- is not a code these are the ones I have found that come close
P0174 1999 FORD WINDSTAR Fuel Injection System Too Lean Bank 2 P0174 2000 FORD WINDSTAR Fuel Injection System Too Lean Bank 2 P0174 2001 FORD WINDSTAR Fuel Injection System Too Lean Bank 2 P0174 2002 FORD WINDSTAR Fuel Injection System Too Lean Bank 2 P0174 2003 FORD WINDSTAR Fuel Injection System Too Lean Bank 2 P0174 FORD Fuel Injection System Too Lean Bank 2

Sep 28, 2010 | 1999 Ford Taurus

1 Answer

2002 winstar bucks when undr load. have just replaces both front o2 sensors.

Check your fuel pressure. Possible cause is that fuel pump doe's not deliver sufficient amount of the fuel to the engine. Replace fuel filter, check for vacuum lines

Feb 21, 2010 | 2002 Ford Windstar Cargo

2 Answers

95 windstar ( 3.8L )Will not fire.Did start and

Clogged fuel filter maybe or the fuel pump isnt coming on or the injectors are bad.

Jul 28, 2009 | 1995 Ford Windstar

1 Answer

Ford Windstar

need to see if u have fuel and spark... if u do then lock drivers door with key wait for maybe 3 min then unlock door with key... then try to start also check fuel pressure

Jun 25, 2009 | 2000 Ford Windstar

1 Answer

1998 ford windstar

the fue TANK pressure senson is on top of the gas tank, there is no pressure sensor on the fuel rail, you have to use a fuel pressure tester.

Jun 04, 2009 | 1998 Ford Windstar

1 Answer

What happens when the fuel pressure regulator goes bad?

The motor more than likely won't start or it could flood out with gas.
Fuel pressure regulator controls fuel pressure. You should have 30psi at the fuel rail for the motor to start.

May 18, 2009 | 1995 Ford Windstar

1 Answer

How to replace fuel filter on 2002 Windstar LX Model 3.8L Engine

you can release the pressure by a presure nozzle on the top of the motor, mine is on the passenger side of the motor has a black cap and looks like a valve stim for a tire kinda. any how take the cap off and you can use a tire pressure chuck to release the pressure

Oct 08, 2008 | 2002 Ford Windstar Cargo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides