2005 Audi A4 Logo

Related Topics:

Anonymous Posted on May 28, 2013

Check engine light

System too lean bank two

1 Answer

chris marchese

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

  • Contributor 48 Answers
  • Posted on Jun 18, 2013
chris marchese
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

Joined: Jun 17, 2013
Answers
48
Questions
2
Helped
13073
Points
68

Sounds like an o2 sensor on the drivers side theres and upper and lower o2 sesnor they go for about 100 bucks on parts geek.

3 Related Answers

Anonymous

  • 1586 Answers
  • Posted on Nov 04, 2009

SOURCE: check engine code -- lean bank code

If that's the only code, it's likely the primary O2 sensor (before the catalytic converter). That's the one that determines the fuel mixture.

Ad
ZJLimited

ZJ Limited

  • 17989 Answers
  • Posted on Nov 10, 2011

SOURCE: system is running to lean on bank one

As it says just one bank I would suspect possibly an injector or lambda. In Vagcom you can do a lambda load test, I suggest you do this as it individually does each lambda sensor to check it.

Check your injectors as well.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

andikovaci

Andi Kovaci

  • 40 Answers
  • Posted on Mar 23, 2012

SOURCE: what does bank 1 too lean mean on audi 2003 a4

please some specification what motor u have with diesel or what?
When the engine light flash you are driving or before you start the car. And if u can more aether specification. Thank you

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What does code p1131 mean on a 2001 ford taurus

bank 1 sensor 1 lean code. Check vacuum lines first. Could be egr leak also. Most vacuum lines run on the back side of the engine on these. Most common fail is the PCV 90 degree elbow. On the passenger side.
0helpful
1answer

Engine light on

P0171 ; Fuel Trim System Lean (Bank 1)
P0174; Fuel Trim too Lean (Bank 2)
fuel trim is system to modify injector pulse if system go lean it will go rich when the system is too much lean and is max.rich it code
look for 02 sensor bank 1 and 2 data
hope it helps
3helpful
1answer

Engine check light on error code 1 is P0171 system too lean bank 1 error code 2 is P0174 system too lean bank 2

P0171 system too lean bank 1
P0174 system too lean bank 2
links to information on the codes

it means that the O2 sensors in your vehicle detected a lean condition in their respective banks. this could be caused by a dirty MAF (mass air flow) sensor or a vacuum leak downstream from the MAF sensor

sometimes you can clean the MAF with electronics cleaner or brake cleaner but be sure to take it off the vehicle first. be careful not to damage the MAF while spraying the cleaner, and allow it to dry completely before installing it on the vehicle.
5helpful
1answer

P0171 and P0174 Left and Right bank lean trouble codes pulled from ECU. Check Engine Light illuminated.

P0171 = system too lean bank 1
P0174 = system too lean bank 2

The fuel/air mixture is too lean for the entire engine. The fuel pump pressure could be too low. The fuel pump pressure regulator could be at fault. There could be an air leak downstream of the MAF sensor. MAF sensor (hot wire type) could be dirty. Check for intake manifold vacuum leaks. The engine coolant temp sensor and/or the intake air temp sensor could be faulty (stuck at full hot mode).
0helpful
1answer

Check engine light is on codes are po171 system too lean (bank 1) po174 system too lean (bank 2) so what can i do

Look for vacuum leaks,that are causing the O2 Sensors to go lean, and set codes on both banks
7helpful
4answers

Check Engine light is on my 1997 F150 with a small V-8. The tester returns codes P0171, P0172, P0174 and P0175. What does all this mean?

those codes are for lean engine condition look for vac leaks at the back of engine to the pcv valve could hear hissing noise with engine running also check egr valve to be stuck open also when was last fuel filter changed? hope this helps .
0helpful
1answer

2000 toyota celica lean on bank 3

Get the fuel system checked... if that's not it then your fuel injector is not working as it should...get those checked also...!!!
0helpful
2answers

OBD Code says ''Lean Bank 2 - System too lean

Bank 2 is generally the passanger side. Recently, We have run across a few system to lean codes in Fords. We have ended up changing the O2 sensors.
2helpful
1answer

Codes #171 & 174

first check out for o2 sensor if its faulty this can show up.but if its proper.Evaporative emission control system leak very small 171 System too lean (bank 1) 174 System too lean (bank 2) 
Not finding what you are looking for?

50 views

Ask a Question

Usually answered in minutes!

Top Audi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...