Question about Cars & Trucks

1 Answer

2005 Chrysler Sebring alarm prob

I try to start my 2005 Chrysler
Sebring it starts and shut off. It does this from time to time

Posted by nyaries agavado on

Ad

1 Answer

Manni F. Bear

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 15 Answers

If the car alarm keeps shutting off you should take it to a mechanic who fixes cars. The alarm in the car is a motion sensor when the car is locked but the sensor is turned off.if the sensor is still on the alarm could go on. The alarms sound comes from a bell inside the car and it vibrates against the inside of the car. The bell could be getting rusty.

Posted on May 24, 2013

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: 2001 Chrysler starting problem

fuses are'nt linked to startor that's a relay as I have mine ran to a car-PC with voice start. ANyhow you would need to look up in owners book fuse location chart. What fuse socket that keeps blowing runs to, my guess is it blows before you start car as soon as your ignition goes to accessory then it kicks on that fuse bank. DO NOT STICK BIGGER FUSE IN AS THIS COULD CAUSE FIRE. first find out what that fuse controls.. is it the fuel system, radio, PCM ect.. could be a ignition fuse but these tend to be bigger what size is the fuse you blow?

Posted on Sep 01, 2008

Ad

Anonymous

SOURCE: Second key and fob for 2005 Chrysler Sebring Convertible

go to your dealer. It will cost you an arm and a leg for the key and fob and also to program it.

Posted on Oct 27, 2008

dealt_soul

James Bradburn

  • 299 Answers

SOURCE: 2003 chrysler sebring

Could be starter, or neutral switch in the tranny.

Posted on Jan 18, 2009

Anonymous

  • 1 Answer

SOURCE: I HAVE A 2005 CHRYSLER SEBRING AND DOME LIGHT,RADIO ALL POWER LOCKS HAVE QUIT WORKING

me too! - looking at fuse #5 red 10 Amp one but has black thing on it.

Can't get if off..

Have read the manual is wrong and to use panel on side of fuse box for fuse locations...

Posted on Jun 24, 2009

techbuster

INDIRA KUMAR

  • 5081 Answers

SOURCE: how do you change the battery for a 2005 chrysler serbring

Battery is behind the tire. You have to remove the tire to get to the battery.
First of all you DO NOT have to remove the tire...you turn your wheels hard right, this will give you plenty of room to get to the battery. Remove the wheel well plate and you will see the battery just in from of where the tire would normally be pointing. From there it's pretty straight forward.

Posted on Dec 06, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 sebring JXI car alarm won't shut off. Soon as I connect the battery it starts blaring, continues while the car is running. Only way to shut off is disconnect the battery. What can I do??


Try connecting the battery, while alarm is blaring, lock the door with the button on the inside of the door, shut the door, unlock with the key, then start. It worked on a friends durango.

Feb 08, 2017 | 2000 Chrysler Sebring JXi

1 Answer

My 1996 chrysler sebring jxi convertible is shut down by the anti-theft system and won't start


tfit8 was correct...I have a 1996 Sebring JXi convertible, I had the exact same problem, I googled it, and that's exactly what worked...resetting the alarm system by locking and unlocking everything, including the truck, with my key

Aug 11, 2012 | Chrysler Sebring Cars & Trucks

1 Answer

2005 chrysler sebring 2.4L 4cyl dohc engine wants to start


Get the exhaust system checked,you may need a new converter.

Nov 06, 2009 | 2004 Chrysler Sebring

1 Answer

1997 Sebring starts, then stalls


You need to disarm the alarm, the 2 problems are related, the start and stall is caused by the fuel pump interupt function of the factory alarm, you triggered it when you replaced the battery, The reset procedure is in the owners manual.

Nov 07, 2008 | 1997 Chrysler Sebring

1 Answer

Alarm


ifoyu lock all of the doors with the keys and then go around and unlock them with the keys and open and shut the trunk again with the keys it should reset the alarm good luck please let me know if it works for you it did for me

Oct 20, 2008 | 1997 Chrysler Sebring

1 Answer

Hello Chrysler 1998 Convertable


lock all the doors with the key then go around and unlock them with the key and open and close the trunk this should work

Sep 06, 2008 | 2002 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23515 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6523 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...