I have a 02 yukon. My cluster lights are not working, except for the gear shift indicator. Can I fix it or do I need a new cluster? The turning signals And warning lights work , it's just the gauges for the speed, gas level, and temp that doesn't light up

Odometer/Gear Shifter (PRNDL) Display FIX - GMC/Chevy ...

? 4:15
https://www.youtube.com/watch?v=-PQ-x11Vjng
Jan 24, 2012 - Uploaded by EricTehRedneck
Odometer/Gear Shifter (PRNDL) Display FIX - GMC/Chevy ...grease, it does in fact help insulate electrical connections but imnot sure lithium would help. .... i have a 2000 Chevy Astro van the park indicator goes out when you start ... volts but now the battery light stays on and the transmission will not shift ...

GM Electronic Gear Indicator and Tripometer Odometer ...

? 5:47
https://www.youtube.com/watch?v=jTQIVS_uB4g
Aug 11, 2010 - Uploaded by zcomputerwiz
Didn't light up anymore. ... Symptoms: PRND321 and Tripometer/Odometer no longer light. ... 2002 which the odometer and shift indicator do not work no more. ... But before taking the dash out I would like to know how to remove those .... Instrument cluster gear select blank screen solder fix Chevrolet GM ...

Repair the odometer/PRND321 LCD display on a '99-'06 ...

www.instructables.com/.../Repair-the-odometergear-select-L...

InstructablesIn this Instructable, I will show you how to repair odometer/gear select ... Repair the

Sometimes on the shifter its self they use two different items, some use a medal rod and some use a cable like an ebrake. if its a cable one it may have stretched and isn't going back to its actual spot for the instrument lights to work properly. you can tighten that cable.that's all I can think of right now good luck.

there is a regulator for the display brightness, you may have it turn'd down or it has stopped working;. it controls the brightness at which the dash lights are. usually has a speedo sign on it. goes up and down. it works with the main light and is conecter to them on the same lighting board if it has gone then a new light swtch control switch will be needed.

transmission mode selection switch failing.

Could be a fuse. Check the interior firewall fuse box under the driver's side dashboard area. That's location of the fuse box. Probably wired in series....maybe wrong bulb replaced.

The speed sensor on your trans sends a signal to the electronics telling it when to shift, this will be where you fault is.

Does this bad boy stay inside a garage or out in the open? what is the temp at night at your location?

You need to replace cluster, 99-02 Silverado GMC all will work even if it has a trans temp truck is pre wired for it. I put a 02 Denali cluster in my 01 silverado no problems. GM can reprogram hours and odometer if you want.

Check for a blown fuse. use your manual to find fuse location. you can remove the shift motor and engage it manually, you need to remove front driveshaft.

Replace the instrument cluster. the LCD display is faulty.