I had same problem it is a ground wire broken in the harness rubber boot between dthe driver door. Peel back the rubber that protects wires and you will find broken ground wire(black) add a piece of wire solder and wrap with electrical tape put rubber boot back into door everything should work.
I will definitly check that out first thing tom, thank you so much!
thank you so much for the advice you are absolutely right I cut down the side of the boots build it back in sure enough there was a big black wire broke touched it together all the windows door locks everything started working again so I spliced it back together put the boot back take that back in everything is working great again thank you so much
×
Yep cut boot will probably be big thick black wire probably sliced. just reconnect and should be good
Check the wiring in the Door. I had the same problem, cut the boot that goes between the car and the door. My wiring was broken and all I had to do was connect them back and everything works again.
Check your black wire from driver door to the body maybe cut
Great advice...Just fixed our problem....Cut the boot just enough to get at wires...the thick black was broken apart....put a connector on both ends...plugged them together...wrapped with tape, put back into boot and everything works again....dome lights go off now, door open light is gone, power mirrors work, power windows work, dash light dimmer works, and remote locks are working again...thanks for the tip...can't imagine what this would have cost at any shop.
Love our Jeep again!!!
Ole6string
Wow. I will check this out this evening. My Jeep is doing the exact same thing. I am scheduled to take it to a mechanic tomorrow.
My mirrors work okay. I can adjust them with the control.
I don't always check Facebook, so if you have additional comments, can you e-mail them to [email protected]. Thanks.
×
How do you put the rubber boot back on the door?
1,196 views
Usually answered in minutes!
windows don't move, lights stay on, drivers side door wont lock, mirrors dont move
i have a 2004 jeep grand cherokee laredo
and i lost all power windows and power mirrors and the only power lock that works is on my passanger door,,,the rest are dead
How hard is it to remove the black protector? i am having problems with it and afraid i will break something.
how hard is it to pull the boot off? i don't want to break something.
sounds like yet another module has bit the dust! Check manual and find it.
Thank you sooooooo much! The guy at Auto zone almost had me buying a control panel thing for the door which was basically $200 and as a last resort I found the solution! We found the broken ground wire and connected it and tada my jeep works again. There was also another wire with a small cut in it so we taped it up. Funny how it took us almost 3 hours of taking the whole door apart and not finding the solution there. But thanks everyone for saving me!
I have a 2004 Jeep Cherokee Special Edition and without warning, my windows stopped working. I can't use the control on the passenger door and the windows won't even open manually, individually.
×