Having trouble removing the window crank and the inside door handle, help please
Hi
Please follow these steps :
1. Remove the 4 screws and the screw in the opening mechanism.
2. Remove the cap on the lock button.
3. Remove the mirror lever cap by pulling it straigt out. It is attached with one clip.
4. Remove the door crank by detaching the C-clip between the spacer and the door panel. It's tricky and somekind of hook could be useful.
5. Pull out the plastic clips. Be careful. I think a spatula could be a useful tool.
6. Move the panel forward and up to remove the opening mechanism from the door. Then pull the mechaninsm out from the panel, turn it and push it back through the panel.
7. At this point the panel should be removed and you can see the door speaker and the adaptor. As you can see the opening mechanism remains on the door.
To put the doorcrank back just put the pieces together in the picture and push it in position.
Good luck and Do rate the solution as FixYa if found useful.
Thanks
Rylee
423 views
Usually answered in minutes!
first one door handle broke, so I had to open from inside by entering passenger side. then passenger side door did same so I entered trough back to open. Now drivers side back broke.
×