An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert that has over 500 points.
An expert whose answer got voted for 20 times.
Re: Reset the maintenance required light on my 2008...
OK ON YOUR SPEEDOMETER, THERES TRIP A, TRIP B, AND THE REGULAR ODMO... U NEED TO PUT IT ON TRIP A (WITH THE KEY OFF) ONCE U GET IN ON TRIP A, PUSH AND HOLD THE BUTTON DOWN,WHILE HOLDING BUTTON DOWN TURN KEY ON, YOU WILL SEE LINES POP UP ON THE ODOMETER, (WHERE THE MILES ARE DISPLAYED) THEY WILL GO OUT ONE BY ONE, ONCE IT STATES 0 YOU ARE GOOD TO GO.. GOOD LUCK AND THANK YOU FOR USE FIXYA.COM..KEITH..
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That light is an indicator that the required miles have been drove and it's time to do an oil change. The light should be reset after every oil change as the computer keeps track of the miles to warn you when it's time again should you forget.
If you want to turn the light off then follow these steps.
Push and hold the trip button and then turn the ignition to on while holding the trip reset button. Keep holding for 10 seconds and the maintenance required light will go offf.
Hello. Welcome to FIxYa. Please allow us to assist you
The maintenance required light is there to remind you that your oil change is due. This light needs to be reset after the oil ic changed, it is manually reset. If you just had your oil changed, the light will not go off by itself. The light is designed to illuminate after 5,000 miles since the last reset procedure.
Hi, it is possible it may require other schedualed services and you are being reminded. However to reset for the oil change you need to have the key off. press and hold down the milage trip reset button and turn the key on. After five seconds the odometer reads "0000000" and the light goes off. If this does not reset then let me know. There is a longer procedure for reseting the other maint services required.
To reset the light, Turn the ignition on Make sure the odometer displays "ODO" 1.Turn the key off 2.Press and hold down the same button you use to get to "ODO" 3.Turn the key back to ON ( while still holding down the button) 4.Hold the button in until all the flashing lines on the odometer go away and the bunch of "000000" shows up and the maint reset light will turn off. Your'e done.
If this doesn't work, you would have to try it on "trip A" instead of "ODO".