- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
see the diagram attached. test the cables, connector, for open, dirty, bad contacts. Switch, test for bad contacts, clean with contact cleaner, and finally test the motor for open or faulty.Test the fuse or . c.breaker for open or faulty, and clean contacts. God bless you
Will the windows go up and or lock from the respective doors? Is this the master control on the driver that does not respond? If so remove the driver door panel ( see 97 Park Ave door lock for instructions ) and check the wireing harness located under the switch control panel, make sure all are pluged in well and are not damaged. If the wireing harness is in good repair You might want to check salvage yards for the appropiate control switch replacement. ( watch them remove it from the junker and you'll know how to install it )
I just posted my experience in another place on this site but on my 1992 PA the accessories relay stuck closed. This relay is the one that allows you to listen to the radio etc and keep things on until you open the door then all shuts off. When it is stuck closed accessories keep running until your battery drains dead. The relay was replaced and all worked great.