Question about 2005 Hyundai Santa Fe
I have noticed some fluid leakage on the power steering pressure hose of my Santa Fe. The fluid level is still between the "min" & "max level as it should be. Is it difficult to replace the power steering pressure hose on the santa fe? Mine is a V6 2.7L.
The difficulty will be from limited work space and incorrect spanners to do the job Otherwise it can be done by any one with some mechanical knowledge.
Posted on Apr 28, 2013
The fastest way is to remove the rad and move the engine ahead enough to change the clutch. Be sure to support the trans. Otherwise you will be into a lot of work under the truck. Frankster016
Posted on Oct 25, 2008
That depends on if the front motor mount is blocking half of the timing belt . Then you have to have the motor lifted out to change the timing belt . Now that just added at least another 2 hours to the labour hours. In all honesty, now you are looking at a 4 to 6 hours of total work . Now , do you know if it is a timing belt or a timing chain. Timing belt, yes will take about 4 to 6 hours , but a timing chain will take over 8 hours because it is inside the motor.
Posted on Mar 24, 2009
If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.
Hope this is of some help.
Posted on Apr 21, 2009
Tips for a great answer:
Mar 07, 2017 | 2003 Hyundai Santa Fe
Aug 28, 2015 | 2004 Hyundai Santa Fe
Apr 11, 2012 | 2001 Hyundai Santa Fe
Jul 19, 2011 | 2004 Hyundai Santa Fe
Jun 08, 2011 | 2002 Hyundai Santa Fe
Jan 30, 2011 | 2004 Hyundai Santa Fe
Dec 25, 2009 | 2001 Hyundai Santa Fe
Oct 23, 2009 | 2003 Hyundai Santa Fe
Oct 02, 2009 | 2003 Audi A4 Cabriolet
238 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: