We checked the sparks and fuel pump there fine
Look for the ignition circuit and security (anty-thief) remote or key entry security.??
SOURCE: 2001 mazda tribute spark plug change
can 't you remove the coils insted of the intake ? It is much easier.
SOURCE: 2001 Mazda Tribute wont start
the problem is probably an idle air control valve. its a cheap fix. the body is ford the motor is mazda.
Luke
SOURCE: check engine light is blinking
check the spark plug wires for dry rotting and check the order there in starting from the back of the motor left to right the order go's 1..2..3 and then the front left to right the order go's 4..5..6 also make sure that all the wires are plugged in the right order on the distributor also it could be your TCS or "TRACTION CONTROL SYSTEM"
SOURCE: cranks but won't start fuel pump not coming on
put a small amount of fuel in the intake near the throttle plate then crank and see if it fires, if it does then it's a fuel problem, if it does not fire then pull a plug wire and put a philips head screw driver into the plug wire hold it 1/4 inch away from a good ground then have someone crank it over, you should see spark and it should be blue, if not then you have a ignition problem a bad coil or cam sensor but need to know what you found out on the two tests I told you first to give you a direction to go.
SOURCE: 2000 mazda 626 wont start,is turning over,fuel
if you have spark at the plugs you need to check fuel pressure at reed valve on fuel rail,you will need at least 55psi to fire injectors,
503 views
Usually answered in minutes!
×