I have a 2005 chrysler 300. when i let off the gas my oil light comes on. when i push the gas it goes off. what can i do?
Have an oil pressure test done.
One of 4 things could possibly cause that.
Bad oil pressure sending unit.
just the oil sending unit.
weak oil pump.
low oil---check oil, see if it needs any.
Posted on Mar 12, 2009
If the oil sensor plug gets contaminated with too much oil (leaking sending uint) it will cause the light to flicker. Of course verify that there is enough oil and run a pressure check. The 2.7 engine is susceptible to sludge buildup if oil changes are not done on a regular basis if yours happens to have that smaller engine.
Posted on Mar 21, 2009
Apr 19, 2015 | 2006 Chrysler 300
Apr 16, 2017 | 2005 Chrysler 300
Aug 22, 2012 | 2005 Chrysler 300
Jan 19, 2018 | 2005 Chrysler 300
Apr 24, 2010 | 2005 Chrysler Town & Country
Dec 29, 2009 | 2005 Chrysler 300
Jun 10, 2009 | 2005 Chrysler 300
May 24, 2009 | 2005 Chrysler 300
Mar 12, 2009 | 2001 Chrysler Voyager
938 people viewed this question
Usually answered in minutes!
Oil strainer removal
×