-The push in On/Off switch above the brake pedal is stuck. (Brake switch)
-Check and push by hands couple time. If it push out and in good but still has no power. Need new one.
Mai
SOURCE: peugeot 106 independence brake lights
Ok man, i don't if that helps you, but when i tried it in my 1989 peugeot 205.
Try this: put on the hazzard lights and that will test some of the brake light circuit.
SOURCE: dipped headlights(both)not working on peugeot
Check the ground out to make sure its ok, are your headlights perhaps burned out ?
SOURCE: Peogeot 307 suspected faulty reversing light switch.
The reverse light switch is located on the transmission housing which is behind/under the air filter housing/battery on the 2.0 litre D turbo model. To replace it you will need to remove the top of the air filter housing and the filter (2 screws plus release the air intake pipe connected to it by a large jubillee clip, also unclip a couple of cables). To remove the switch disconnect the cable clipped to it. You will need a deep 22mm socket and a universal/flexible coupling to unscrew the switch (as access is poor unless you remove the battery compartment/air filter housing).
SOURCE: peugeot 307 1.6
peugeot and citreon cars do bite high generaly, it is hydaulic there is no adjustment. but it also depends on how high it is ?? does it slip if you slightly rest your foot on whilst driving?? they do have a problem with the bearings going through the cover as it is the same bearing as a HDI . but you woud notice this as a different problem. ie noise or vibration on pedal. call me for more info .. paul @ the clutch centre..01527 64440 07790438337
2,615 views
Usually answered in minutes!
×