At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check the timming, check spark plugs, check compression of the cylinders, check spark plug wires and if all else fails replace the ignition coil module
all Zetec engines (2.0 DOHC) are NOT interference engines. There are deep reliefs cut into the top of the piston to clear the valves when they are fully extended. There will be no valve damage if the timing belt breaks on a Zetec engine.
undo engine mounts and jack engine up a bit,cheaper to find a complete engine in scrapyard and change it if its endy.this is often cheaper than a repair
drain oil using allen key plug underneath gearbox till all oil is drained refit use new seal if old 1 is damaged then look at front of g/box quater of the way up is another allen key plug remove fill with new oil till it starts to run out hole refit plug and ur done
×