Question about 1993 Ford F250

1 Answer

1993 ford f250 will not start, no fire or spark

Truck has set all winter, problem being the starter went out, changed the start, no fire....since then ive changed the distributor, cap, pick up coil, plugs, wires, and the coil....still no fire

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 339 Answers

Starter Solenoid replaced?

Posted on Apr 06, 2013


5 Suggested Answers


  • 1 Answer

SOURCE: my car will turn over

also your car may need a timing belt change

Posted on Oct 02, 2008


darin brown

  • 393 Answers

SOURCE: 1978 Ford Pick-up with 351m engine WITH NO SPARK.

if module is fine try replacing pick-up coil located in distributor.

Posted on Nov 11, 2008



  • 659 Answers

SOURCE: 1995 Ford F350 5spd. distributor cap wiring diagram/layout!!!

1) #1-4 pass side front to rear #5-8 drivers side front to rear
2) 1-3-7-2-6-5-4-8
3)#1 is usually marked on cap wires go ccw
4) TDC #1 cyl you must remove the shorting plug before timing
it is located by the dist plug or the ignition module small gray plug

Posted on Dec 13, 2008


  • 5 Answers

SOURCE: 1994 f150 no fire to coil or fuel pump

i got a 1994 f150 that starts but cuts right back off so i had no fuel psi so i put a new fuel pump and fillter then found out that it was not getting power to the pump the cut off is not triped and no brakes in the wires can anyone help??

Posted on Sep 10, 2009

cy schousboe

  • 2002 Answers

SOURCE: need spark plug wiring diagram for 1965 ford

Try this. If the distributor is in the right way, the clips that hold the cap on should be just a hair off of 12 o'clock and 6 o'clock. #1 is positioned at 1 o'clock, which is at the firewall side of the distributor. The firing order is 1-5-4-2-6-3-7-8and is counterclockwise from #1. The passenger's side is cylinders 1-2-3-4, from the front of the car. The driver's side is 5-6-7-8 from the front. Hope this will help.

Posted on Feb 07, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 88 ford F250 that want start after ran hot pulling in my drive-way a year ago.. Any answers?

is it seized check and see if there is a crank rotation, then start from the beginning battery, connections from and to battery, starter, to aldenator and so on. Check spark spark no fire. If its seized then you have a wholelist of other problems.

Sep 13, 2013 | Cars & Trucks

3 Answers

Trying to start, engine turns over just fine but will not fire. Therefore, will not start. Sound like the starter??

If your engine is turning over (spinning) when you are trying to start it, it is not your starter. First make sure you are getting fuel and spark to your spark plugs and go from there. There is a fuel pump cutoff switch that can "pop" which is common in Fords but there are is a relay as well if your not getting fuel. If your not get spark then your looking at a whole different matter then. If you need the location of the cutoff switch or relay just post a comment to this solution and I believe they let me know through my email. I will send you that info if you need it as well as some picture as to the locations. i hope this helped and good luck.

Feb 27, 2011 | 2004 Ford F250

1 Answer

Hi we have a ford f250 7.3 diesel, and won't start, we have a click when we turn the key, we change batterys, and nothing, then we change the solenoid and nothing, then we change the starter and start, we...

it still sounds like you guys still have a starter problem are you sure you got everything put together right and if so maybe something is worn out inside and not making a good connection

Feb 09, 2011 | 1993 Ford F250

1 Answer

F250 1988, won't turn over, changed spark plugs, distributer cap, wires, battery charged, fuel saftey button pushed... Now what do we check

this trucks starter has the starter coil on the fire wall find it and try jumping the terminals to see if the motor will turn over

Sep 06, 2010 | Ford F-250 Cars & Trucks

1 Answer

95 F250 not starting

You said you tightened the battery cables, did you check the other end of the negative where it bolts to the engine. When you tightened the cables you also used a battery brush and cleaned the posts and ends?

Mar 27, 2010 | 1995 Ford F250

3 Answers

1993 ford f250 will crank but not start. Ran fine after headers were installed. next morning, just turned over, but never started.

Is it possible that during the process some wires for the emission system came in contact with the heat and burned them? This could easily cause a short and burn out the ECM or a fuse.

Sep 20, 2009 | 1993 Ford F250

2 Answers

Cant get my 93 caravan started

Check the timing belt. The belt can break and it will turn over with the starter but won't fire.

Jun 02, 2009 | 1993 Dodge Caravan

3 Answers

No restart

change fuel filter if you have then change fuel pump

Feb 18, 2009 | 1993 Ford F250

Not finding what you are looking for?
1993 Ford F250 Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides