Question about Toyota Corolla
Check all the fuses. You more than likely blew some main fuses. I think there are a couple near the positive battery cable end.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
Posted on Apr 02, 2013
SOURCE: battery on toyota corolla 2003
make sure battery cables are secure on or into the battery and not loose. If cables are loose it will cause your alternater to fail therfore not fully keeping battery charged. If battery cables are not loose replace battery.
Posted on Nov 17, 2008
Probably a resetting circuit breaker in the system. Some are reset when they cool off, others when keyed off. Must be something drawing too much current, or circuit breaker getting weak. Usual causes of drawing too much current in your case would be power window motors. With that said, there are some things you can try to lessen the load on the circuit such as spraying silicone down sides where felt is for easier window movement. Those areas get dried out and tend to grip glass as it's going up & down causing extra load on motor. I've also had to resort to removing door panels & spraying grease on tracks & guides inside door, to help. try silicone down sides first and see if it helps. Also make note if one window seems to cause it more than another, that gives you a good one to start on.
Posted on Mar 14, 2009
you may have to disconnect the battery for a minute or so ,this will reset the alarm. check your remote it does have a battery in it. otherwise you have to look for a fuse somewhere under the dash close to the fuse box.each one is diff. depending if it original toyota or aftermarket alarm.
Posted on Aug 16, 2009
Tips for a great answer:
Dec 08, 2012 | 1997 Toyota Corolla
Jul 19, 2017 | 1991 Toyota Corolla
Aug 30, 2011 | 1997 Toyota Avalon
Dec 15, 2010 | 1996 Toyota Corolla
Dec 05, 2010 | 2003 Toyota Corolla
Feb 11, 2010 | 1997 Toyota Corolla
Nov 22, 2009 | 2005 Toyota Corolla
Oct 21, 2009 | 1994 Toyota Corolla
Aug 13, 2009 | Toyota Corolla Cars & Trucks
111 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: