Question about 2003 Pontiac Grand Am
Posted by Anonymous on
SOURCE: removing front door panel
there will be two bolt that are hidden under your arm rest they will probably be hidden little caps that just pop off most likely a star screwdriver you will need a window handle remover tool if you have power windows dont worry about it but you will also need a door panel clip remover tool or you can get by with a screwdriver covered in a cloth insert at bottem of the door an gently pry untill the door clip start to pop and release you will also need to remove a screw where you open the door from the inside hope you get it off if you break any of the door clips(happens all the time) just take broken one to the dealer or canadian tire or parts jobber hope this helps
Posted on May 28, 2008
I had almost the identical problem on my 2005 F150 FX4 Extended cab last weekend. The power door locks would not lock using the keypad, remotes, or door buttons. Almost all other functions worked correctly. The doors unlocked, the radio delay functioned, and the interior lights dimmed. When I used the remote the horn would beep twice indicating that a door was open even there was no message on the message center that a door was open. When I used the keypad or remote, I could hear a soft click from behind the seat. I think it was coming from the body security module or body security module - whatever Ford is calling it this year. I pulled the fuse for the Power Door Locks(BSM). As I removed it, I heard a soft click - sort of like a relay resetting. It may have come from the VSM/BSM. It may have possibly been a stuck actuator releasing. I don't think so. It wasn't that load. In any case, everything is functioning correctly now.
Posted on Nov 20, 2008
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.
Posted on Oct 26, 2009
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.
Posted on Nov 09, 2009
lock smith or someone authorized to use a slimjim[can do more damage if dont know how to use ]--or-- key fob wont work if vehicle battery dead if u can reach up under car at front and release hood latch then jump battery and then use key fob to unlock door
Posted on Feb 20, 2010
Testimonial: "thank u"
Tips for a great answer:
Mar 20, 2012 | 2003 Chevrolet TrailBlazer
Mar 23, 2011 | 2001 Pontiac Grand Am SE
May 06, 2010 | 2002 Pontiac Grand Prix
Mar 06, 2010 | 2003 GMC Sierra 1500
Aug 21, 2009 | 1994 Pontiac Grand Am
Jun 14, 2009 | 2003 Pontiac Grand Am
Jun 08, 2009 | 2000 Pontiac Grand Am GT
Aug 27, 2008 | 2000 Pontiac Grand Am GT
Jul 21, 2008 | 2000 Pontiac Grand Am GT
Jul 14, 2008 | 1992 Pontiac Grand Prix
79 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: