Question about Oldsmobile Toronado

Open Question

Belts on 1984 toronado

How do the belts go in what order

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 34 Answers

SOURCE: replacing belts

You can get a "Chilton" book that will show everything for your vehicle or try googling "1984 Buick Riviera belt diagram" and there may be a site that has it posted.
Let me know if this helps.

Posted on Jan 25, 2009

Ad
michigan man

edgar walker

  • 3533 Answers

SOURCE: need serpentine belt sequence

try this website to see if they have your car listed its www.autozone.com and there should be a diagram under the hood telling you how the belts go and try this website as well its www.alldatadiy.com i also would like to give you this information if you ever have any hard to find GM-part its Schram auto & truck parts they sells only Gm- 1-800-292-1032 and they website is www.schramauto.com and i hope i have been some help to you Michigan Man

Posted on May 20, 2009

Ad

cy schousboe

  • 2002 Answers

SOURCE: drive belt schematic for 1984 chevy 6.2L diesel




I have an 82 6.2 and I suspect they are the same. The innermost belt runs over the fan to the A/C unit and down under the power steering back to the crank. The middle belt runs over the fan to the power steering. The out side belt runs over the fan to the alternator. Hope this helps.









Posted on Aug 15, 2009

Anonymous

  • 2 Answers

SOURCE: I need to replace the belts in my 1984 nissan sd25

loosen the alternator bolt and then you can replace the belt

Posted on Feb 23, 2010

gtyner

  • 280 Answers

SOURCE: Hi, I need a fan belt diagram for my 1984 El

You should be able to get the diagram from your local parts house.

Posted on Mar 15, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt routing diagram for 1984 Chevy G20 van 5.0 with multiple belts


first is alternator/ water pump/ crank... second is power steering and smog if equipted.. last is ac compressor..

Feb 24, 2013 | Cars & Trucks

1 Answer

BELTS USED ON A 1984 CHEVY G20 VAN


  • A charging system "V" belt and a Power Steering Pump "V"belt. The size depends on AC or not and weather or not it is a manual transmission. I have provided a link for you so you have a place to order your belts from if you so choose. You can also see the belts you need.
Regards, Tony

Jun 12, 2011 | 1985 Chevrolet Sportvan G20

1 Answer

I need to replace a serpentine belt on a 1984 Ford Bronco. Can anyone tell me where to find the belt tensioner? Also can the belt be replaced without removing the radiator fan? Thanks.


No - your belt cannot be replaced without taking the fan off. More than likely, you also have multiple belts. You will have a 1/2 inch spot on most of the plates to tighten each individual component. Look for a place to attach a 1/2 inch breaker bar/ratchet next to the alternator, steering pump, smug pump, etc. These should all be v-belts on a 1984, not a true serpentine.

May 08, 2010 | 1984 Ford Bronco

1 Answer

Changing belts


at least one item on every belt system has a way to be adjusted to loosen the belt, and also tighten it,,, check to see if the item has an enlongated hole on its mounting bracket and even if the bolts are loose sometimes you need a lever to help loosen it to slide it looser or tighter. when you finally do get all of your belts on, push down on them with you finger to see the amount of deflection doesn't exceeed 1/'2 inch...hope tjhis helps

Feb 27, 2010 | 1984 Pontiac Grand Prix

1 Answer

Need serpentine belt sequence


try this website to see if they have your car listed its www.autozone.com and there should be a diagram under the hood telling you how the belts go and try this website as well its www.alldatadiy.com i also would like to give you this information if you ever have any hard to find GM-part its Schram auto & truck parts they sells only Gm- 1-800-292-1032 and they website is www.schramauto.com and i hope i have been some help to you Michigan Man

May 20, 2009 | 1984 GMC VanDura

1 Answer

My 84 4runner screams driving and strating up, could it be the belts


my past with screaming cars.... were pullies going bad. but yea the belts can cause that too... check the tension on em .. may just need tightened up some.

if belts are tight im banking a pullie is bad!

Feb 18, 2009 | 1984 Toyota 4Runner

1 Answer

Replacing belts


You can get a "Chilton" book that will show everything for your vehicle or try googling "1984 Buick Riviera belt diagram" and there may be a site that has it posted.
Let me know if this helps.

Jan 25, 2009 | 1984 Buick Riviera

1 Answer

Need diagram for how the belts are run on a 1984 GMC Jimmy V6


I did not pay attention  but figured it out the alternator had a dual pully on it and the parts store sold me one with single pully. Took dual pully of old one an put on new one, the rest was easy.

Sep 06, 2008 | 1984 GMC S-15 Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...