I bought new lights, but i dont know how to install them.
Are you sure it is a bulb issue, if all the brake lights are not working chances are it may be a brake light switch which is located on the brake pedal assemly.
If it's the bulbs, there are two screws holding each rear light assembly in place, open the hatch, they are on the hatch side of the lights, remove the screws and then the light will come free, to reove the sockets just rotate them and they will come out. pull the bulbs out and reverse all the steps.
If you need a switch, let me know, I'll give you the steps for replacement.
Good luck
R
179 views
Usually answered in minutes!
×