Here are the torque specs you seek:
• Caliper mount bolts are to be set at 74 ft-lb
• Driveshaft axle nut should be at 177 ft-lb
• Hub and bearing mounting bolts should be at 133 ft-lb
SOURCE: Replacing front wheel hub assembly on 2006
Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs
Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"
SOURCE: Front Hub Bearing Torque specs to complete replacement
THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS
SOURCE: Just replaced front wheel bearing hubs assy. What
THE HUB AND BEARING ASSEMBLY MOUNTAINING BOLTS TORQUE IS 133 FT LBS.
SOURCE: I' m looking for the torque specs for a front hub
i have a 2002 HD and the deal told me 177 ft. lbs. good luck
9,960 views
Usually answered in minutes!
×