1993 Ford Crown Victoria Logo
Amber Dunlop Posted on Mar 12, 2013

1989 Ltd Ford Crown Victoria - Taillights not working despite new bulbs and wiring

1 Answer

A

Anonymous

When the new wiring or socket went in,
did you check for power & ground first

Sort of need that

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 23, 2009

SOURCE: tail lights not working while drive. brake,blinkers work

i have a crown victoria with brake lights no tail lights could you help me?

Ad

Anonymous

  • 3533 Answers
  • Posted on Mar 21, 2009

SOURCE: fuse box diagram for my 1989 crown victoria

it should under the lid of the fuse box and in the owners manual if no manual try here for one online www.edmonds.com

Anonymous

  • 33 Answers
  • Posted on Mar 23, 2009

SOURCE: need wiring diagram for 2008 ford crown victoria

Hello,

You can purchase the wiring diagram for $5.99 from the following site: http://www.wiring-diagram.com/. You can also purchase a wiring diagram book from the following link: http://cgi.ebay.com/ebaymotors/2008-FORD-CROWN-VICTORIA-MARQUIS-WIRING-DIAGRAM-MANUAL_W0QQitemZ120394723100QQcmdZViewItemQQimsxZ20090320?IMSfp=TL090320147007r15080.

Hope this helps,

Chris

Anonymous

  • 2 Answers
  • Posted on May 25, 2009

SOURCE: Need Owner Manual

I FOUND ONE ON E-BAY HERE IS THE LINK OF ALL AVAILABLE AS OF 5/25/2009

http://motors.shop.ebay.com/__?_from=R40&_trksid=p3841.m38.l1313&_nkw=OWNERS+MANUAL+1989+CROWN+VICTORIA&_sacat=





KRIS

Anonymous

  • 335 Answers
  • Posted on Jul 14, 2009

SOURCE: Need a fuse panel diagram for 91 Crown Vic.

Try this site
http://www.eautorepair.net/

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the pcm on 1989 crown Victoria ltd?

Ford puts all the ECM/PCM's in the firewall on the passenger side.
0helpful
1answer

The dash lights and rear lights do not work on my 1989 ford crown victoria ltd and fuses are okay. what else can it be?

I had the same problem its either the light switch or a loose connection going to the switch I could reach up in the dash and wiggle the wires going to the light switch and mine would come on
1helpful
1answer

1989 crown victoria tail light just stop woriking

CHECK FOR THE BULBS PROBABLY YOU WILL HAVE A BRAKE LIGHT BULB WIRE BROKEN.JUST RENEW THE BULBS.
4helpful
1answer

Firing order for 1989 crown victoria ltd

For the 1989 Ford Crown Victoria:
I do not know if you have the 5.0L or 5.8L; however I have included both below.

For the 5.0L
Firing Order:
1-5-4-2-6-3-7-8
Cylinders:
.......(back).......
|..4..|........|..8..|
|..3..|........|..7..|
|..2..|........|..6..|
|..1..|........|..5..|
.......(front)
Distributor:
.....(back)
[.]..5.....1
4..............8
2..............7
.....6.....3.[.]-clip
.....(front)

For the 5.8L:
Firing Order:
1-3-7-2-6-5-4-8
Cylinders:
........(back).........
|...4...|.......|...8...|
|...3...|.......|...7...|
|...2...|.......|...6...|
|...1...|.......|...5...|
........(front)
Distributor:
.....(back)
[.]..3....1
7.............8
2.............4
.....6....5.[.]-clip

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
1helpful
1answer

Headlight problem

I guess that means replacing the bulbs didn't work? The only other thing might be the dimmer switch. Its located on the bottom of the steering column, about halfway down fron the steering wheel.
0helpful
1answer

AIR CONDITIONING COOLANT-USE OLD, OR CONVERT TO NEW COOLANT??

Please convert to the new one. It's a lot better and cheaper to maintain.
Not finding what you are looking for?

356 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...