Question about 1989 GMC Sierra
Posted by Anonymous on
SOURCE: HAVE A 03 GMC SIERRA
I had the same problem in my wife's 2003 Yukon Denali. The power seats and passengers side window wouldn't work. Turned out to be a blown Buss Type fuse in the Underhood Fuse Block. It is the one marked MBEC 1 50amp. Hard to tell if the are blown so look very carefully. Should look like a hoop with two shiny solderlooking bubbles on either side. On my blown fuse, it caught my attention because it looked like the solder was missing and I had to look very closely to see the bottom of the "hoop" was open. They are very hard to remove and must be pulled straight up.
This type of fuse looks like a red square with a clear plastic top showing the fuse link under the plastic. On my vehicle it is on the top row second one from the left.
Posted on Dec 21, 2008
SOURCE: Drivers Side Door Handle
You need to take inside door panel off This just clips on but there are screws in armrest and inside door handle look for any other small square covers that may hide screws Lift panel up Make sure window is up Disconnect wiring from panel and you can now get at door handle linkage and bolts
Posted on Jul 10, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Remove the clips and screws securing the old window to the arm and slide it out through the top of the door (may need to be maneuvered out)
Posted on Sep 11, 2009
Tips for a great answer:
Aug 26, 2012 | 2000 GMC Sierra
Aug 31, 2011 | GMC C1500 Cars & Trucks
Jan 12, 2011 | 2003 GMC Sierra 1500
Apr 01, 2010 | 2005 GMC Sierra 1500 Hybrid
Nov 11, 2009 | 1989 GMC K1500
Jul 10, 2009 | 1989 GMC S-15 Jimmy
Mar 28, 2009 | 1989 GMC Sierra
Mar 14, 2009 | 2008 GMC Sierra 1500
Jan 24, 2009 | 1999 Chevrolet Silverado 1500
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: