Got this truck for free and lost the one and only key to the ignition... I need to know how to remove the ignition switch cylinder to replace with a new one.
SOURCE: I need to replace the
its under the dash youll have to remove stuff to get to it but its about an hour long job not too hard to do
SOURCE: Ignition switch? 1985 Nissan Pickup
I have the same truck I rebuilt, it, took 2 years. Its on car domain.com. heres the link.http://www.cardomain.com/id/Marine4x4
The problem is with the wire going to the starter, the relay telling the starter to work. it will get loose or caroded, check that first, it sounds like your problem. Good Luck!!
Dan
SOURCE: how to remove broken key in Ignition switch
If your key is magnetic and it is not jambed in there to much you may be able to get a magnet and pull it out. If it is stuck pretty bad you will have to take the steering column apart, but trying calling a lock smith first, he may be able to help.
SOURCE: 1986 Nissan 720 4x4 pickup truck. Speedometer
Either the gauge is bad, the cable is kinked or the speedometer connector is bad...at the tranny.
SOURCE: 1995 nissan pickup 4 cylinder timing chain - 256k miles
did u recently buy it used-mite of been already done--how r the other components enginewise-its an old car n theyll be more things--but if u luv it then get a haynes repair manual at the zone
999 views
Usually answered in minutes!
×