How to replace broken outlet cover on 2006 Toyota Sequoia

SOURCE: how to reset 2006 toyota sequoia after change oil

Previous Post dead wrong...

Turn ignition to "ON" position. Make sure odometer is on trip setting not on total vehicle mileage setting.

Turn ignition OFF

Push and hold odometer button while turning ignition to "ON" position. HOld for about 4-5 seconds until maintenance light goes off. Turn ignition OFF. Start up vehicle. There should be no more maintanence light.

SOURCE: How do you get the tailgate latch of a 2006 Toyota

you need to remove the back door interior panel and open the door by the latch itself

SOURCE: how do i change spark plugs on a toyota seqoiua

You need to remove the coil packs that are located above the valve cover. It is important to get the correct spark plugs from toyota. Aftermarket plugs are not recommended.

SOURCE: reset the service indicator light - 06 Toyota Sequoia

set the mileage when the odometer is showing. put the key to off position. press and hold the reset button then turn the key to on position, do not start. then continue holding the reset button until the reading stops to zero or blank. turn it off, that should reset the light indicator

Testimonial: "thanks for the help! it worked like a charm. appreciate it! "

SOURCE: how many quarts of oil we need in toyota sequoia

6.5 Qts. Use 5w/30 motor oil