Cars & Trucks Logo

Related Topics:

Posted on Mar 02, 2013

I have a 2001 chev blazer 4.3 I hear sounds like I have a manifold leak but its not the exhaust monifold on the passenger side

1 Answer

A

Anonymous

Intake possibly

Go to Real Fixes Real Fast on You Tube Video
& watch Wayne show you the problem

5 Related Answers

pal03246

Phil Lovisek

  • 726 Answers
  • Posted on Jul 19, 2008

SOURCE: manual shift mode and exhaust leak

You most likely have a broken wire in the steering column that goes to the manual shift mode switch. And as far as the exhaust leak goes, you need a new manifold. They crack and leak. Common problem.

Ad

Anonymous

  • 110 Answers
  • Posted on Nov 01, 2008

SOURCE: oil leak on manifold passenger side - v6 4motion

Get a can of Gunk and clean the engine according to the directions there (please do read them), with attention to the area around where the oil leak is.  Once you get the motor squeaky clean, you will be able to trace back to where the oil is coming from.  It may be running down the underside of a hose so you will need to look carefully.  You can do all this in the driveway.  You will probably have to let the engine get to operating temp before it will start leaking. 

mkv0525

Mike Vincent

  • 358 Answers
  • Posted on May 20, 2009

SOURCE: exhaust manifold leak-2001 sequoia

toyota has a big problem with exhaust manifolds craking be hind the heat shields. will have to reolce both sooner or later.not an light job.

Anonymous

  • 10 Answers
  • Posted on Dec 01, 2009

SOURCE: 95 f150 4.9L leaks from exhaust manifold with a

You might have a warped exhaust manifold, or head. You can check this with a straight edge and a feeler gauge. Also check for hairline cracks.

Is the carbon on the outside of the injectors, or on the inside? If it's on the inside then it could be from cheap gas. Do a fuel injector service to get them cleaned out.

If you had exhaust leaking into the intake manifold you would definitely know about it(backfire).

jose_v17

Jose Velazquez

  • 229 Answers
  • Posted on Apr 03, 2010

SOURCE: removing exhaust manifold

http://tearstone.com/eclipsefsm/15.PDF
(Click this link)
This is the section of the factory service manual that deals with the disassembly and reassembly of the intake plenum and the exhaust manifold. The posted numbers is the sequence of the disassembly and reverse when you are ready to put it back together. Torque values are also displayed. The exhaust manifold teardown for the 3.0L engine begins on PG. 17
feel free to contact me if you require more help

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Half throttel pops in intake monifold

sounds to me like you have vacuum leak or manifold leak. See if you can hear you intake sucking air my need to replace gasket or check vacum line loose or cracked
2helpful
2answers

What are the to coil packs on a set of spark plug wires on a 2001 4.3 chev blazer for and what plugs do they go on

Your Coil Pack Is Separate And Plugs Into The Middle Of Distributor Cap.Follow The Middle Wire To Coil Should Be On Passenger Side
Easy Quick Change Out. Cost Is Around $40
1helpful
1answer

Smoke comin from top rocker cover smell like burnin oil

Could the smoke be coming from the exhaust manifold on the passenger side of the engine? When the valve cover starts to leak, it is common for the oil to leak down and burn on the outside of the exhaust manifold.
Replacing a valve cover gasket is not difficult or expensive, and it is common for BMW valve cover gaskets to get brittle and shrink and start leaking every 10 years or so. My wife's 330 needed a new valve cover gasket at 6 years.
0helpful
1answer
0helpful
1answer

Engine service code P155 What part do I need? What p/n

p0155 is an oxygen sensor code. ( 02 sensor bank 2 sensor 1 ). I believe bank two is the one for cylinders 2, 4, and 6. Sensor 1 would be the first one that is closest to the beginning of the exhaust manifold. hope this helps and have a good day ! on passengers side of engine. go to any auto parts store to purchase the sensor.
2helpful
1answer

How many oxygen sensor on a 02 chevy blazer

Hi, there are 4 sensors on your truck--two upstream and 2 downstream. The upstream sensors are mounted in the exhaust manifolds and the downstream sensors are mounted just behind the catalytic converters. The upstream and downstream sensors are different. Bank 1 is on the driver's side and bank 2 is on the passenger's side. Please let me know if you have more questions, and thanks for using FixYa.

jturcotte_682.gif
jturcotte_683.gif
0helpful
1answer

I have a stock '02 RSX-S with 93K miles.I recently started hearing a ticking sound coming from the engine while accelerating at low rpm's in any gear (i can hear it at higher rpm's too, but at that point...

Sounds like an Exhaust Manifold leak on only one cylinder. The Gasket is probably blown out. Check around where manifold is bolted to the engine. Any leaks are usually evident by a black sooty deposit.
0helpful
1answer

2001 silverado when accelerating truck almost sounds like has a exhaust leak but is not a exhaust leak any ideas

You may have a crack in crossover pipe on driver side near exhaust manifold where it bolts to crossover pipe flexing from engine movement opens crack on acceleration, check for cracks on both sides driver and passenger.
Not finding what you are looking for?

79 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...