1990 2wdr 150 how to remove play in steering
On the top of the steering gear box you will see a threaded rod with a slot in it. On this threaded rod there will be a hex nut that you will need to loosen. Back the nut off so you can turn the rod in gently until the play is gone. Do not over tighten or damage will occur. You will need to look in a spec book to get the correct inch pounds setting for the steering gear lash. This is a simple process. Good luck
495 views
Usually answered in minutes!
i already done that? all it did was tighten up the steering, had to loosen it back up. did not take out play? still much play in steering wheel about 1/4 turn hard to keep between the lines.
×