Rubbing compound will buff off the oxidation that effects (clouds) the outside surface of plastics. Some waxes have a little abrasive that will help do this. Toothpaste will also work mixed with wax. Use some muscle and buff til it is dry to restore the plastic gloss. Shops use an electric or pneumatic buffer with a wool or foam pad and extra fine rubbing compound.
SOURCE: headlight need replacing
for the bulb just turn the holder under the hood.
coke and whitening toothpaste.put on a rag and buff it in realy good.
SOURCE: 1999 pontiac grand am headlight glass is foggy-how do I clean it?
You can use a product called goof off or a bug abd tar remover to get the area clean. To change your light bulb you can open your hood and between the radiator and the front end assembly see the back of the light socket. Turn it to the right and it should release. Make sure when you replace the new bulb not to touch the bulb in anyway with grease from your hand or dirt this will case the halogen bulb to burn out. So once you have replaced this just repeat the steps to reinstall.
SOURCE: removal of headlight assembly
You cannot clean the insides. The are sealed if you attempt to remove them, which is a big job in itself, you run the risk of damaging the seal and allowing water and moisture to get inside which could lead to more problems. What I would recommend is to visit your local parts store, and pick up a bottle of Maguire's cleaner wax. Apply some of the wax directly on the headlamps and with a terry cloth or a microfiber cloth rub the wax in real good with a little bit of pressure. Allow the wax to cure and then polish it off with a dry part of the towel. Generally these headlamps oxidize and causes this foggy or cloudy appearance.
SOURCE: 1999 taurus has foggy headlights.
Most Auto Stores sell a headlight solution that cleans the fogginess of your headlight. Assuming your headlight looks dirty and cloudy as would a pool, a simple solution is to pick up the cleaner at any auto place. That is a lot cheaper than buying a new headlight.
SOURCE: headlight lense needs to be cleaned, foggy. can
Take a buffer on a drill and some polishing compound done in ten min.
63 views
Usually answered in minutes!
×