Do I have to remove the intake bolts to remove intake 4.2 Chevrolet
SOURCE: cylinder head bolt torque chevrolet 3.4
here is the troque spec for the cylinder heads.
Cylinder Head Bolt
60 N·m
44 lb ft
95 degrees
Cylinder Head Bolt
60 N·m
44 lb ft
95 degrees
Cylinder Head Bolt
60 N·m
44 lb ft
95 degrees
first pass 44 ftlbs
second pass 95 degrees
SOURCE: brake caliper removal
Sometimes they use a T-50 torx bit, and sometimes they use either a 15mm or 18mm bolt, however the caliper bracket is a 21mm bolt
SOURCE: how to seperate engine and tranny once all bolts
There are dowel pins on each side of the block, that the transmission goes on to. You might try spraying some WD-40 between the block and bellhousing. You might try using a pry bar, or moving the transmission up and down to get it to break lose from the block.
SOURCE: 2002 trailblazer exhaust manifold why did bolts come loose.
I have a 2002 Trailblazer to and i have had that happen to me 2 times
367 views
Usually answered in minutes!
×