Left turn signal on 2011 Nissan Rogue blinking fast

These days, it is a function of the BCM.

What's the 2012 Nissan Rogue turn signal relay location?

https://www.vehiclehistory.com > questions > whats-the...
3 answers
The 2012 Nissan Rogues turn signal relay, which is referred to as a flasher in some parts of the world, is housed firmly within the cars dashboard. https://forums.nicoclub.com/flasher-relay-location-t386148.html

https://www.google.com/search?q=2016+Nissan+Rogue+SV.+Where+is+the+flasher+relay+unit

Hi,

Please open the front hood and check for the relay by the headlights. It's good to have the product image with you so that you can use it as a reference to easily identify the relay once you come across it. Using any relevant diagrams in the car's documentation would also be helpful in identifying the relay.

Thank you.

Use the obdi troubleshoot problem check for scaning

I'm afraid not. 2018 Nissan rogue has 5 x 114.3mm pattern where the 2011 Kia Sorento is 5 X 115mm.

You should check out www.reliable-store.com they have info on repair, service, wiring diagram, electrical diagram,

fuse diagram, troubleshooting, PCV, owner's/service/repair/parts manual, fault codes, error codes, etc everything on all vehicles. must check it out

If the front and rear bulbs flash fast also, replace the hazard switch or you could live with it. As they are working. If one doesn't work, check grounds. I just run a new ground, much easier than cutting open the harness to find the break.

Here is what the service manual says. Looks like it is not a flasher relay but a function of the body control module.

TURN SIGNAL AND HAZARD WARNING LAMP SYSTEMSystem Description OUTLINE Turn signal lamp and the hazard warning lamp is controlled by combination switch reading function and the flasher control function of BCM.
TURN SIGNAL LAMP OPERATION - BCM detects the combination switch condition by the combination switch reading function. - BCM supplies voltage to the right (left) turn signal lamp circuit when the ignition switch is turned ON and the turn signal switch is in the right (left) position. BCM blinks the turn signal lamp.
HAZARD WARNING LAMP OPERATION BCM supplies voltage to both turn signal lamp circuit when the hazard switch is turned ON. BCM blinks the hazard warning lamp.
TURN SIGNAL INDICATOR LAMP AND TURN SIGNAL SOUND OPERATION - BCM transmits the turn indicator signal to the combination meter with CAN communication while the turn signal lamp and the hazard warning lamp are operating. - Combination meter outputs the turn signal sound with the integrated buzzer while blinking the turn signal indicator lamp according to the turn indicator signal.
HIGH FLASHER OPERATION (FAIL-SAFE) - BCM detects the turn signal lamp circuit status by the terminal current value. - BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn signal lamp operating. NOTE: The blinking speed is normal while operating the hazard warning lamp.

Does it squeak only when you turn left ? Pour a bit of water ( about 2 teaspoonful on the belt and see if noise stops. Also check if left wheel is not touching the mud cover.thanks. Is power steering fluid level ok ?

how many add 134a to 2011 Nissan Rogue

probably a broken control switch (the one on the steering column)