1991 chevy s10 number one cylinder has antifreeze build up

Question 1

0answers

I have a 1991 chevy S10 Tahoe with a 1987 chevy S10 2.5l engine in it. was driving one day the truck quit running not spark at plugs , on spark at coil and no spark anywhere.

Be the first to answer Nov 06, 2015 • Cars & Trucks

0helpful

1answer

I have a 1994 Chevy s10 truck with a 4.3 liter - vin W. The problem Im having is number 2 cylinder and number 3 cylinder dont seem to be firing properly. Changed plug,wires,cap and rotor. Has spark, and...

probably the injectors are not working
run the fault codes or have the injectors for those cylinders checked
check wiring connections for the harness

Mar 31, 2017 • 1994 Chevrolet S-10 Blazer

1helpful

1answer

Need firing order for spark plugs on a Chevy S10 1991 pickup

4 cylinder 1342. 6 cylinder 165432. Theirs others for differnt motors and models years as you did'nt say which engine or year of your truck. The friring order is on the intake manifold of most of the older models that use distrubutors.

Jun 24, 2011 • Chevrolet Chevy Cars & Trucks

1helpful

3answers

I changed the spark plugs and wires on my chevy s10 2wd pick up, which is a 4 cylinder and now it will not turn over. I might have the wires mixed up on the distributer cap. Can someone show me a picture...

GET A PIECE PAPER DRAW A LARGE CIRCLE TOP UPPER HALF CIRCLE LEFT TO RIGHT WRITE NUMBERS 1 AND 3 BOTTOM HALF CIRCLE LEFT TO RIGHT RIGHT NUMBERS 2 AND 4 THAT YOUR DISTRIBUTOR SPARK PLUGS WIRES LOCATION.STANDING ON SIDE OF ENGINE WHERE DISTRIBUTOR IS LOOKING DOWN AT DISTRIBUTOR 1 AND 3 FIRST TWO SPARK PLUGS TERMINALS NEXT TO ENGINE. AND 2 AND 4 SPARK PLUGS TERMINAL ON CAP FACING YOU. THIS IS CYLINDERS LOCATIONS STANDING IN FRONT OF ENGINE.RUN WIRES FROM DISTRIBUTOR CAP TO PLUGS TO THE ENGINE SPARK PLUGS.

Oct 17, 2010 • Chevrolet S 10 Cars & Trucks

2helpful

1answer

Crossed up plug wires on 1991 chevy s10 2.8 need diagram

For the 1991 Chevrolet S10 or T10 Pickup 2.8L V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
.......(back)........
|..5..|........|..6..|
|..3..|........|..4..|
|..1..|........|..2..|
.......(front)

Distributor:
....(back)
....3...4.(+)-screw
2...........5
(+)1...6
....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 22, 2010 • 1991 Chevrolet S-10

1helpful

2answers

I have a 94 s10 blazer 4.3 and I had to remove the distributor but never marked it so now the timing is messed up. The distributor dose not have a #6 alignment mark so I cant get it working right. How do I...

Remove cylinder # 1 spark plug, # 1 is the front one on drives side, turn crankshaft pulley to TDC on compression stroke, you'll feel the comperssion at cylinder #1 spark plug hole, follow cylinder # 1 spark plug wire to distributor cap, mark outer part of distributor where # 1 sits, remove distributor and restabe distributor with rotor at mark you made, then set timing.

Jan 22, 2010 • 1994 Chevrolet S-10 Blazer

0helpful

2answers

Spark plug order to distributor

For a 1985 Chevy S10 with a 2.8L engine the firing order is: 1-2-3-4-5-6 The Distributor rotation is clockwise.Take off the cap and bump engine till the rotor points to the no. 1 plug. this is the no.1 contact on the cap. follow rotation around the cap in order. {ie. 2,3,4 ect.} hope this helps.

Oct 12, 2009 • 1985 Chevrolet Chevy

8helpful

3answers

I have a 1991 Chevy S10 2.5 L4, do you have a wiring diagram for the distributor cap and spark plug wires?

firing order 1342, distributor, clockwise rotation.

Aug 26, 2009 • 1991 Chevrolet S-10

0helpful

1answer

Water pump

4 Cylinders A 2.5L TBI (found in 47% of 1991 Chevrolet S10 P/U 2WD)
4 Cylinders E 2.5L TBI (found in 53% of 1991 Chevrolet S10 P/U 2WD)
6 Cylinders R 2.8L TBI (found in 47% of 1991 Chevrolet S10 P/U 2WD)
6 Cylinders Z 4.3L TBI (found in 53% of 1991 Chevrolet S10 P/U 2WD)

Feb 02, 2009 • 1991 Chevrolet S-10

2helpful

1answer

My chevy s10 failed emissions

Have your cat. converter checked out. I just had one of these for the same reason in my shop today.

Jul 09, 2008 • 1991 Chevrolet S-10

Question 2

David Kassin

Chevrolet Master 981 Answers
Posted on Feb 21, 2013

David Kassin

Chevrolet Master

Joined: Jan 24, 2013

Answers

981

Questions

0

Helped

199539

Points

2887

Spray from hose during heat soak after shutting off.
possible head gasket leak. leaky crossover between heads. or
cracked /broken head.

Answer 2 · 7/9/2008 12:00:00 AM

Anonymous

702 Answers
Posted on Jul 09, 2008

SOURCE: my chevy s10 failed emissions

Have your cat. converter checked out. I just had one of these for the same reason in my shop today.

Marvin

85242 Answers
Posted on Sep 16, 2008

SOURCE: plug wire diagram

This was all I could come with, hope it helps.

mikehumble

124 Answers
Posted on Dec 08, 2008

SOURCE: chevy s10 4 wheel drive will not engage

There is a vaccuum operated switch located on the transfer case that sends vaccum to the accuator that pulls a cable that locks the front end in. Check for vac coming in and out of this switch if no vac out replace it. This switch is a very common problem. You can find them at most parts stores in the help section #49315. please rate.

jimholden3

495 Answers
Posted on Jul 27, 2009

SOURCE: need the fuse diagran fo chevy blazer s10 4wd 1991

go to autozone.com, enter your vehicle specs, and follow the prompts for the repair section, then to electrical diagrams..........and its FREE!

Mike Butler

6674 Answers
Posted on Aug 26, 2009

SOURCE: I have a 1991 Chevy S10 2.5 L4, do you have a

firing order 1342, distributor, clockwise rotation.

Testimonial: "you were a life saver, this is just what I needed thanks"

Answer 3 · 7/9/2008 12:00:00 AM

Anonymous

702 Answers
Posted on Jul 09, 2008

SOURCE: my chevy s10 failed emissions

Have your cat. converter checked out. I just had one of these for the same reason in my shop today.

Answer 4 · 9/16/2008 12:00:00 AM

Marvin

85242 Answers
Posted on Sep 16, 2008

SOURCE: plug wire diagram

This was all I could come with, hope it helps.

Answer 5 · 12/8/2008 12:00:00 AM

mikehumble

124 Answers
Posted on Dec 08, 2008

SOURCE: chevy s10 4 wheel drive will not engage

There is a vaccuum operated switch located on the transfer case that sends vaccum to the accuator that pulls a cable that locks the front end in. Check for vac coming in and out of this switch if no vac out replace it. This switch is a very common problem. You can find them at most parts stores in the help section #49315. please rate.

Answer 6 · 7/27/2009 12:00:00 AM

jimholden3

495 Answers
Posted on Jul 27, 2009

SOURCE: need the fuse diagran fo chevy blazer s10 4wd 1991

go to autozone.com, enter your vehicle specs, and follow the prompts for the repair section, then to electrical diagrams..........and its FREE!

Answer 7 · 8/26/2009 12:00:00 AM

Mike Butler

6674 Answers
Posted on Aug 26, 2009

SOURCE: I have a 1991 Chevy S10 2.5 L4, do you have a

firing order 1342, distributor, clockwise rotation.

Testimonial: "you were a life saver, this is just what I needed thanks"

Related Topics:

1991 chevy s10 number one cylinder has antifreeze build up

1 Answer

David Kassin

5 Related Answers

Anonymous

Marvin

mikehumble

jimholden3

Mike Butler

Add Your Answer

Attachments: Added items

Related Questions:

I have a 1991 chevy S10 Tahoe with a 1987 chevy S10 2.5l engine in it. was driving one day the truck quit running not spark at plugs , on spark at coil and no spark anywhere.

I have a 1994 Chevy s10 truck with a 4.3 liter - vin W. The problem Im having is number 2 cylinder and number 3 cylinder dont seem to be firing properly. Changed plug,wires,cap and rotor. Has spark, and...

Need firing order for spark plugs on a Chevy S10 1991 pickup

I changed the spark plugs and wires on my chevy s10 2wd pick up, which is a 4 cylinder and now it will not turn over. I might have the wires mixed up on the distributer cap. Can someone show me a picture...

Crossed up plug wires on 1991 chevy s10 2.8 need diagram

I have a 94 s10 blazer 4.3 and I had to remove the distributor but never marked it so now the timing is messed up. The distributor dose not have a #6 alignment mark so I cant get it working right. How do I...

Spark plug order to distributor

I have a 1991 Chevy S10 2.5 L4, do you have a wiring diagram for the distributor cap and spark plug wires?

Water pump

My chevy s10 failed emissions

Not finding what you are looking for?

1991 S-10

I have a 1991 chevy S10 Tahoe with a 1987 chevy S10 2.5l engine in it. was driving one day the truck quit running not spark at plugs , on spark at coil and no spark anywhere.

Ask a Question

Check Out the Latest Top Trucks Report!

Top Chevrolet Experts

ZJ Limited

john h

Thomas Perkins

Are you a Chevrolet Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

1991 chevy s10 number one cylinder has antifreeze build up

1 Answer

David Kassin

5 Related Answers

Anonymous

Marvin

mikehumble

jimholden3

Mike Butler

Add Your Answer

Attachments: Added items

Related Questions:

I have a 1991 chevy S10 Tahoe with a 1987 chevy S10 2.5l engine in it. was driving one day the truck quit running not spark at plugs , on spark at coil and no spark anywhere.

I have a 1994 Chevy s10 truck with a 4.3 liter - vin W. The problem Im having is number 2 cylinder and number 3 cylinder dont seem to be firing properly. Changed plug,wires,cap and rotor. Has spark, and...

Need firing order for spark plugs on a Chevy S10 1991 pickup

I changed the spark plugs and wires on my chevy s10 2wd pick up, which is a 4 cylinder and now it will not turn over. I might have the wires mixed up on the distributer cap. Can someone show me a picture...

Crossed up plug wires on 1991 chevy s10 2.8 need diagram

I have a 94 s10 blazer 4.3 and I had to remove the distributor but never marked it so now the timing is messed up. The distributor dose not have a #6 alignment mark so I cant get it working right. How do I...

Spark plug order to distributor

I have a 1991 Chevy S10 2.5 L4, do you have a wiring diagram for the distributor cap and spark plug wires?

Water pump

My chevy s10 failed emissions

Not finding what you are looking for?

1991 S-10

I have a 1991 chevy S10 Tahoe with a 1987 chevy S10 2.5l engine in it. was driving one day the truck quit running not spark at plugs , on spark at coil and no spark anywhere.

Related Topics

Ask a Question

Popular Questions

Chevy S10 Tail Light issue

How do i bypass the security on my chevrolet s10

Engine Code P1870

2001 Chevy s10 with no heat

4.3 v6 connecting rods and main bearings torque specs

Check Out the Latest Top Trucks Report!

Top Chevrolet Experts

ZJ Limited

john h

Thomas Perkins

Are you a Chevrolet Expert? Answer questions, earn points and help others

Manuals & User Guides