Question about 1992 Oldsmobile Ninety Eight Regency
Cable broken need to open to change cable and battery
Remove the belt, Remove the 2 bolts that hold the pump to the engine by using a socket and extension through the hole in the pump pulley. Remaove the 2 hoses. you may have to pull the pump out through the wheel well.
Posted on Aug 16, 2009
cam sensor is only half of the cam circuit, the other half of the cam circuit is the magnet on the timing chain. the cam sensor reads from the magnet every time the engine completes a revolution,
what happens is the magnet on the chain will break into smaller piece which makes the sensor harder to read every time the engine make a complete revolution.
most likely you'll need to replace the timing chain to fix this.
Posted on Oct 13, 2009
the easiest way is to strip the end of the original cable and pull the cable to open the hood. if not you have to raise the car and try to reach the hood latch and open if from there.
Posted on Nov 23, 2009
Tips for a great answer:
Oct 05, 2010 | 1991 Oldsmobile Ninety Eight Regency
Aug 30, 2010 | 1995 Oldsmobile Ninety Eight Regency
Aug 22, 2010 | 1991 Oldsmobile Ninety Eight Regency
Aug 19, 2010 | 1995 Oldsmobile Ninety Eight Regency
Apr 11, 2010 | 1992 Oldsmobile Ninety Eight Regency
Apr 07, 2010 | 1989 Oldsmobile Ninety Eight
Oct 18, 2009 | 1995 Oldsmobile Ninety Eight Regency
Oct 12, 2009 | 1991 Oldsmobile Ninety Eight Regency
Jul 18, 2009 | 1992 Oldsmobile Ninety Eight
141 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: