2002 Jeep Grand Cherokee Logo

Question about 2002 Jeep Grand Cherokee

1 Answer

Transmission not shiftin

Changed fliud filter n gasket shifted at first for minute then will not shift out of first

Posted by jodi lynn on

Check Price eBay

1 Answer

raj somaiya

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 5,370 Answers


For car not changing gears it can be shifter assembly issue, or it can also be transmission issue. Get the shifter assembly inspected with ignition OFF.

For more troubleshooting, I suggest you to get the Following help link checked, its complete step by step procedure to inspect gear shift issues: -----

GEAR SHIFT ISSUES

http://alltypesofpartsreplacing.blogspot.com/2012/11/gear-shift-issues.html

==========


TRANSMISSION GEARS SLIPPING AND FLUID LEAKING ISSUES

Transmission gear assembly and transmission needs inspection. Also check the transmission fluid level. Also is the fluid getting leaked or its low.


There are few very helpful links with solutions to troubleshoot this problem.


========

I suggest you to refer these links.


Click the link below:-----


2000 Toyota Camry: Transmission slipping and Stuck up?

http://whatisbyme.blogspot.in/2012/05/2000-toyota-camry-transmission-slipping.html

-----------

Transmission Slips out of 2nd gear?

http://repairhelpcenter.blogspot.in/2012/02/transmission-slips-out-of-2nd-gear.html

----------

Car engine Overheats and transmission starts slipping?

http://schematicsdiagram.blogspot.com/2011/12/car-engine-overheats-and-transmission.html

-------------

2006 Ford Explorer: Engine Vibrates and gears slipping?

http://whatisbyme.blogspot.in/2012/06/2006ford-explorer-engine-vibrates-and.html

---------------

Clutch slipping problem?

http://howtobyme.blogspot.in/2012/03/clutch-slipping-problem.html

----------

Dodge Anti slip System is not operating?

http://whatisbyme.blogspot.in/2012/07/dodge-anti-slip-system-is-not-operating.html

----------

OD light flashing and transmission fluid leaking?

http://repairhelpcenter.blogspot.in/2012/02/od-light-flashing-and-transmission.html

------------

Transmission fluid leaks near radiator on ford windstar?

http://repairhelpcenter.blogspot.in/2012/02/transmission-fluid-leaks-near-radiator.html

-------------

Ford Windstar transmission fluid leaking?

http://technoanswers.blogspot.in/2012/02/ford-windstar-transmission-fluid.html

-----------


These details will help.

Thanks.

Posted on Feb 15, 2013

5 Related Answers

Anonymous

  • 6982 Answers

SOURCE: transmission trouble

If unit has been neglected, my first thought is serves you right! Maintaining this stuff is essential.
That being said, change the fluid and filter. Use a container of Lucas transmission additive, along with the new oil. Do not expect a miracle. If it does help, change the fluid again in about two weeks. You don't have to drop pan if it has a drain plug when changing the second time. Put additive in on both changes! Likely you have a bad varnish buildup on the insides of the valve body.. you must be a really good tech to take one apart to clean it, so do not even think about it!!! Most shops do not advise changing fluid on neglected units but, if it already is malfunctioning you have everything to gain and nothing to loose at this point!
Good luck

Posted on Jan 10, 2009

Anonymous

  • 158 Answers

SOURCE: transmission wont shift

check the kickdown/throttle valve cable. It may be bound up and stuck in the maximum position giving you extremely late shifts.

There ISN"T any modulators or vac lines on any Chrysler automatics

Posted on Apr 03, 2009

Anonymous

  • 475 Answers

SOURCE: Automatic transmission problem

Is this car a six or eight cylinder?
If the car has a kickdown cable check the adjustment.

Posted on Oct 29, 2008

bfg3

  • 51 Answers

SOURCE: 4x4 slips shiftin gears starting and stopping

you might already know but when shifting into 4wd you can shift into 4hi while driving as long as the tires,(all four) are travelling the same speed. you can't shift into 4wd if you are spinning. 4 low you have to completely stop. When you are in 4 low as you know the power of vehicle is greatly increased due to gear reduction. so if you are seeing slipping symptoms, you might want to change transmission filter. It might not be much help to you but it might prevent problems down the road. also when changing fluid be sure to put mopar transmission fluid for replacement on jeep. like gm calls for dexron. the transfer case on dodge and jeeps also takes transmission fluid. I had to replace a t-case on my friends dakota that was making a grinding noise and it turns out a seal had leaked some fluid out and burnt up some bearings. pretty expensive. they are chain driven. hope I didnt get too carried away, because I am not a transmission expert but I just wanted to share what I did know with you.

Posted on Jan 12, 2009

Anonymous

  • 5 Answers

SOURCE: transmission not shifting out of low check engine light on

Sounds like the speed sensor is gone. It is located on the Tranny

Posted on Mar 29, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

1994 automatic transmission A4LD slow upshift in all gears

low fliud pressure in transmission..check levels and change fluid/filter and retry vehicle.
0helpful
1answer

'03 Yukon Denali XL. Rpms go up to 3K at around

when you had the transmission filter and gasket changed. do you know if they back flushed the fluild. there is 5 to 7 shift soleniods in the transmission. when garages back flush transmission it causes the solenoids to close. are there any codes. sounds like your 1st and 2nd shift solenoid is stuck closed
0helpful
1answer

How to check transmission cooler?

I wonder if the ****** is about to go out. Or a shift solnoid is hanging up. ****** shop your best beat.
4helpful
3answers

I have a 1994 Grand Caravan LE AWD. I just got for a basic van. Drove it 200 mile on Wedensday after picking it up from auction. Drive it today thursday, after an hour of local runing around, the car...

2nd gear is the default when the computer sees a problem,when you restart it is cleared. I thought the clearing procedure was key on engine off,depress throttle fully 4 times within 5 seconds.
If it clears when you restart I would think that a good sign,at least it's not a hard fault.
Most likely a control solenoid in the module mounted on the front of the trans-axle.Serviceing the tranny would be a good start ,wouldn't get it flushed ,just drop the pan and change the filter.
0helpful
2answers

Can you explain to me how to get to the sensor located underneath my dash that has to do with my transmission shifting? And what that fuse is called? in my 1999 buick park avenue

LOOK FOR TRANSMISSION FUSE UNDER THE HOOD IN THE FUSE AND RELAY BOX.HAVE VECHICLE CODE SCANNED FIRST TO SEE WHAT TRANSMISSION SHIFT SOLENOID BAD.GUESSING WILL COST YOU.SOME TRANSMISSION SHIFT SOLENOIDS COST $70.00 TO $80.00 BUCKS.
0helpful
1answer

Won.t shift into grear, how do i replace the tansmission filter?

TO DO A TRANSMISSION FLUID CHANGE YOU NEED HAVE TRANSMISSION FLUID ON HAND YOU NEED TRANSMISSION FILTER AND GASKET.YOU NEED 3/8 WRENCH THE RATCHET TYPE WITH METRIC SOCKETS. YOU NEED JACK TO RAISE VECHICLE SUPPORT VECHICLE ON JACK STANDS.YOU NEED A DRAIN PAN. ONCE YOU GET VECHICLE OFF GROUND.PLACE DRAIN PAN UNDER TRANSMISSION OIL PAN REMOVE OIL PAN DRAIN BOLT.LET FLUID DRAIN OUT IN DRAIN PAN THEN SCREW DRAIN PLUG BACK IN PLACE DONT OVER TIGHTEN.REMOVE OIL PAN AND GASKET. BESURE TO HAVE PAPER TOWEL ON HAND.MAKE SURE TRANSMISSION OIL PAN GASKET SURFACE CLEAN BEFORE INSTALLING NEW PAN GASKET. ONCE TRANSMISSION OIL PAN REMOVED. REMOVE THE OLD TRANSMISSION FILTER INSTALL THE NEW FILTER.THEN WITH NEW GASKET ON OIL PAN IN PLACE.OIL PAN NEED TO BE CLEAN SO THE GASKET ADHESIVE WILL HOLD PAN GASKET IN PLACE WHILE INSTALLING PAN AND GASKET TO TRANSMISSION.INSTALL OIL PAN BOLTS INSTALL THEM CRISS CROSS TORQUE PAN BOLTS TO 7 TO 10 FT LBS. LOOK IN OWNERS MANUAL FOR TRANSMISSION FLUID CAPACITY.BUY 10 QUARTS .TO BE ON SAFE SIDE SO YOU WILL HAVE ENOUGH FLUID ON HAND. IF YOU DONT HAVE NO TRANSMISSION FLUID CAPACITY. ADD 7.5 QUARTS FLUID.WAIT FOR 2 MINUTES.CHECK TRANSMISSION FLUID LEVEL ON DIP STICK. SHOULD BE ON THE FULL MARK.CRANK VECHICLE UP.LET IDLE FEW MINUTES CHECK TRANSMISSION DIP FLUID LEVEL IF DROPPED ADD LITTLE MORE.WHILE ENGINE IDLING GETTING WARM UP. KEEP EYE ON FLUID LEVEL.WHEN FLUID LEVEL STOP DROPPING. APPLY BRAKES HOLD FOOT ON BRAKES SHIFT THROUGH ALL GEARS TWO TIMES. THEN CHECK FLUID LEVEL SHOULD BE ON FULL MARK.CHECK FOR LEAKS WHILE ENGINE RUNNING.
0helpful
1answer

The transmission is shifting hard going from 1st to 2nd and from 2nd to 3rd on my 1998 GMC sierra 1500 4x4 5.7 liter. This does not happen until about 15 to 20 minutes of driving. Before that the...

rec check fluid first. If trans fluid hasn't been changed in last 30,000 miles change fluid, filter and pan gasket. At that time inspect for foreign materials in bottom of pan or on magnet if you have one. If truck has over 100K and fluid was never changed you may have more problems if changing the fluid.
0helpful
1answer

Transmission quits all gears after short drive, cut it off and wait 3 or 4 minutes and it will shift again for a short time .

Check fliud level first, being low can cause, also might want to remove transmission pan and inspect for a clogged filter, if ok rhen seals in transmission bad would have to rebuild or replace transmission.
Not finding what you are looking for?

997 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22509 Answers

Kevin Daniels

Level 3 Expert

1463 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...