Transmission makes a chirping sound from 1st to 2nd

SOURCE: 1999 Ford Crown Vic transmission problems

check u joints and drive shaft for weights hope this works

Marvin

• 85242 Answers
• Posted on Nov 06, 2008

SOURCE: hard shift and blinking overdrive

The blinking overdrive button is telling u that a serious fault has occurred in the electronic controls or a mechanical fault such as excess slippage is occurring.

SOURCE: Wiper motor replacement for a 99 crown vic

I replaced the same part on a 1994 Crown Vic. There are a few bolts which go through rubber mounts on the firewall and that is how the wiper motor fits against the firewall. There is a clip on the wiper drive that must be pressed and slid off the wiper shaft. The hardest part was getting clearence between the engine and wiper motor. If I remember there was a way to turn the wiper case to clear the engine. I have asked myself why this was engineered like this? There is nothing important in the way that 3/4" of clearance could have been given for removal.

SOURCE: Replace horn on 2006 crown vic

I believe once you have mounted the horn and connected the wire you will find that the horn wire was cut at (by) the steering coloum that the siren override was hooked to,you will have reconnect this,I hope this helps you

rtpflh

• 546 Answers
• Posted on Oct 17, 2009

SOURCE: can I put crown vic tail lights, deck trim(reverse

if they are of the same model year,yes they will fit.

Testimonial: "only person who couls answear me. THANKS"