Question about Cars & Trucks

2 Answers

Washer fluid doesn't flush on rear window

When i try to flush my rear window nothing happens, the wipers starts moving as they are supposed to, but there's no washer fluid coming out.

Posted by haakon on

Ad

2 Answers

danoyachtcap

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 2,907 Answers

Sprayers are clogged up. You can clean out the sprayers with a needle, some have two holes so look carefully.

Posted on Apr 21, 2015

Ad

Keith Ptashnik

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

Not to be a smart @ss but is there fluid in the tank? Hose might be plugged to nozzle, remove hose from nozzle and see if anything comes out of the hose when you push button. if it does nozzle might be plugged. Use alittle Compressed air, to back feed through nozzle from outside to inside. Need more info: temps outside, kind of vehicle (year make and model) check fuses for washer fluid?

Posted on Feb 10, 2013

  • haakon Feb 10, 2013

    The car is an Chrysler Grand Voyager 1997, Yes there is fluid in the tank. How do i get to the hose? Temp last time i tried to use it was around -10 celsius, but i dont thing that matter because it doesn't work at summer either.

×

Ad

2 Related Answers

localwonder

Michael Masters

  • 6784 Answers

SOURCE: rear window wiper wiring diagram

this website is great for retrieving wiring diagrams.

Posted on Feb 11, 2009

Chuck Bamforth

  • 205 Answers

SOURCE: Rear windshield washer motor works, but no fluid comes out

Rear washer may have it's own reservoir . Can you hear a pump humming when you activate the washer? Look in the under flooor compartment

Posted on Mar 22, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear window washers work in all temperatures. Front washers work only when outside temps are above 0 ! Once temps are below zero there is nothing!!!


Sounds like you got it. Water is freezing up the wiper motor or wiper transmission at a certain temp due to water leakage in what is supposed to be a sealed area. (inside wiper motor, wiper trans linkage). "SOUNDS LIKE" water may have seeped in the moer seal & froze it or stripped the gears of the wipers? Good Luck Frank M

Feb 15, 2016 | 2014 Hyundai Santa Fe

1 Answer

I push the wash button for the front windshield and nothing happens if I turn the wippers on they work this is on 2012 Acadia


GMC Acadia Forum: Front washer fluid not working. Help?

www.acadiaforum.net > ... > Problems, Recalls, TSBs, FAQs & Links

Dec 3, 2010 - 17 posts - ‎12 authors
I had my 2007 Acadia in for the heated washer fluid recall a few months ago. ... bad in the Midwest, I just noticed the front washer fluid not working. ..... the fuse finally seated properly and my windshield washer now works. Front Windshield Washer Spray
20 posts
Aug 26, 2012
Inoperative Rear Driver's Side Power Window
16 posts
Apr 21, 2012
Heated washer fluid
20 posts
Jan 29, 2012
Front Windshield Wiper Motor burning out??
20 posts
Feb 3, 2011
More results from www.acadiaforum.net

Nov 28, 2015 | Cars & Trucks

1 Answer

When starting wipers came on and stay on no matter of position of control, washer fluid over head dome light won't turn on, rear washer and whiper won't work.


Wipers won't turn off......sometimes! - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > Diesel > 6.7L Power Stroke Diesel
Feb 3, 2014 - Starting around 25,000 miles my wipers stayed on the slowest intermittent setting even when ... They only two that come to mind is the switch inside the cab or the wiper motor control board. ... The wipers do not park at the correctposition ... It doesn't really matter what steps need to be taken to fix the issue.

Window washer fluid put in window washer won't work now.

www.cargurus.com > Questions > Kia > Sorento

CarGurusAug 31, 2015 - Window washer fluid put in window washer won't work now. ... 4 answers. wipers working, not the washer though, pulled pump, intake screen clean. 2011 Kia Sorento Base ... Interior lights do not work when door is opened 7 answers. At first the back seat overhead light stopped working. Kia said it would ...

Nov 26, 2015 | 2011 Dodge Durango RT

1 Answer

Chrysler mini van


Do you have power and ground at the wiper motor ?

Jun 19, 2013 | Cars & Trucks

1 Answer

Can't get fluid from wiper fluid tank


Nothing happens as in no spray or nothing happens as in no spray but arms still take a swipe. Make sure you have fluid in reservoir and that you can hear the washr pump. If not replace the washer pump.

Jun 18, 2012 | 2000 GMC Jimmy

2 Answers

MY WIND SHIELD FLUSH WATER IS NOT WORKING, WHAT SHOULD I DO?


check that hoses have not come off or are being pinched when closing your hood

if living in below freezing temp. make sure using all season fluid, check for clog via sediment also in hose or in the outlet/port itself.

Feb 21, 2011 | 2003 Dodge Caravan

2 Answers

Rear window washer does not spray fluid. When I push the rear window washer button, the front washer/wipers turn on. The rear wipers work normally.


I have the same problem with my 2000 chevy blazer as skornec had posted. I kinda already figured the hose or spray nozzle was plugged. But the problem with checking those items is that I don't know where the hose is located to the back wiper. And the only thing that could be I see that could be the spray nozzle doesn't even have holes that washer fluid could spray from. So basically I just would LOVE if someone could please inform this lame brain of where to find the spray nozzle on the rear window and where in the interior of my blazer does the washer hose run.

Apr 02, 2010 | 2000 Hyundai Accent

2 Answers

The rear wiper on my '99 model exped isnt working ,ford global says its the motor and it will cost me P13k . any one who can help me find a mechanic do some repair on this?


what is P13K?

check the fuse first. dealer can hook up NGS Tester and get fault codes to see what is wrong.

Principles of Operation
NOTE: The generic electronic module (GEM) will not activate the rear wiper system if either the liftgate or the liftgate glass is ajar. If either the liftgate or the liftgate glass becomes ajar while the rear wiper is in operation, the GEM will park the rear wiper motor.
There are two distinct modes of wiper operation:
  • Off Mode: In this mode, there is no rear wiper activity, and the wiper motor will be in the PARK position.
  • Interval Mode: This mode is selected when the rear wiper switch is in either the Interval 1 or 2 position. When this mode is selected, the rear wiper motor is driven up onto the glass by activating the rear wiper UP relay. When the wiper motor HIGH/LOW/PARK position input reaches the high position, the UP relay is deactivated and the DOWN relay is activated to reverse the wiper motor direction. When the wiper motor reaches the LOW position, as determined by the HIGH/LOW/PARK position input, the GEM deactivates the DOWN relay and will begin a new wiper cycle 1 to 10 seconds later, depending on the interval position selected.
To engage the rear window washer, rotate the rear window washer selector downward to the WASH position. The rear window wiper will run as long as the WASH position is selected. When the rear window washer selector returns to the OFF, INT 1 or INT 2 position, the washer will stop immediately, but the rear window wiper will continue for two to three sweeps and then return to its previous mode of operation.
The low washer fluid indicator chime warns that the washer fluid level is low. The low washer fluid indicator chime is a single tone with a duration of one second. The chime will sound when the low washer fluid indicator is initially activated.
The low washer fluid indicator warns that the fluid level in the washer reservoir is low. The low washer fluid indicator will illuminate when the washer fluid level is low and the ignition switch is in the RUN position.
The low washer fluid indicator will deactivate when the washer fluid reservoir is filled and the ignition switch has been cycled from RUN to OFF, then to RUN.
Inspection and Verification
  1. The wiper/washer system is a generic electronic module (GEM) controlled system; refer to Section 419-10 .
  1. Verify the customer concern by operating the wiper/washer system.
  1. Visually inspect for obvious signs of mechanical and electrical damage.


Visual Inspection Chart Mechanical Electrical
  • Hoses to windshield washer pump
  • Wiper linkage
  • Fuses 6 (5A), 8 (5A), 15 (5A), and 20 (5A)
  • Wiring harness
  • Loose or corroded connector(s)
  • Relays
  • Motors
  • Multifunction switch
  • Washer fluid level switch


----------------------------------------
  • The wipers are inoperative — rear
  • Fuses 6 (5A), 8 (5A), 15 (5A), and 20 (5A).
  • Circuitry.
  • GEM.
  • Multifunction switch (wiper/washer switch).
  • Rear wiper up relay.
  • Rear wiper down relay.
  • Rear wiper motor.

May 12, 2009 | 1999 Ford Expedition

1 Answer

2003 Rav4 windshield washer fluid not coming out


Inside the Reservoir Under the Hood there is a Small Pump that needs to be Replaced.

Jan 16, 2009 | 2004 Toyota RAV4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23438 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...