Question about 1995 Buick Regal
Neither window will roll down, could it be the fuse and how do I change the fuse?
It could be the fuse to the power windows. Check the fuse box . it is on either side of the dash just inside the door. or near the glove box. Look for any burnt fuses and replace them with the same amp fuse. The same color.There is a fuse remover in the fuse box. You use that to remove the fuses by grabbing the fuse with the edge of the tool. And pulling the fuse out.
Posted on Feb 06, 2009
SOURCE: fuse box diagram
it can't possibly be a fuse if your front windows are working.
i also have a 94 taurus and this same thing has occured, the L-R window won't move at all. but all of my other windows work. it is probably a bad window motor. I've heard a lot about 94's having this problem. take it to the dealer and see if they have any Technical Service Bulletins about this.
Posted on Jul 30, 2008
U CAN'T PUT 12VOLTS TO A WIRE IT HAS TO BE APPLIED THROUGH A RELAY CONTACT. THE EASIEST SOLUTION IS TO GET THE SWITCH FROM THE AUTO SALVAGE YARD.
Posted on Aug 05, 2008
The first thing that I would do is check for electricty at the motors them sel and work your way back.If there is elec. at the window motor it's self susspect a motor problem.Remove the motor to see if it spins (but it dosen't me its good it could be week)next check for binding in the window mecanism.
Posted on Aug 15, 2008
I have a Pontiac grand prix that my passenger rear window wont roll up, i need to get the window to close atleast temporarily until i can get the problem looked at. I have taken the door apart and tried pushing it up, but it wont go as much as i have tried. Any advise would be great right about now. thanks
Posted on Sep 20, 2009
Tips for a great answer:
Nov 01, 2013 | 2003 Ford Ranger Regular Cab
Nov 06, 2012 | 1996 Lexus ES 300
Nov 29, 2009 | 2002 Ford Taurus
Jun 06, 2009 | 2007 Scion tC Coupe
May 31, 2009 | 2000 Ford Focus
Mar 14, 2009 | 1997 Isuzu Rodeo
Jul 01, 2008 | 1994 Ford Taurus
360 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: