The car drives smooth, but no power, slows down to about 35miles, and the shifting takes a little long to shift to next gear.
SOURCE: 1998 Chrysler Sebring JXI V6 2.5L Transmission Problem
it sounds like the transmission solenoid or possibly the transmission itself trying to go out
SOURCE: gear shifting on 2002 chrysler 300 m
transaxle reset mode page 148 of the owner manual. when the transaxle sensor detects an abnormal condition that can cause damage, it drops the transmission into second gear to protect the transaxle from damage. pull over to the side of the road, shut off the car and restart it. it may go away for a little while and let you drive normally. mine kept getting worse. I took it to the dealer and they had to replace a part that works with the transaxle (not the transaxle or transmission itself). it cost about $900 and took them 3 attempts as the first two replacement parts were bad out of the box.
SOURCE: Chrysler 3.5 won`t rev past 2500 rpm?
remove the aircleaner intake hose and, check the intake air control flap for free movement
SOURCE: Shift problems in 95 chrysler concorde transmission
Sorry but if your reverse is having trouble you will probably have to replace or rebuild tranny like me. Otherwise try new filter and fluid first.
SOURCE: re chrysler sebring gear stick stuck
how do you replace the pink pawl on 2007 chrsyler sebring
728 views
Usually answered in minutes!
×