Question about 2011 Chevrolet HHR

1 Answer

2011 Chevrolet HHR ESC

I was driving and it first popped up on the Dash and said Service ESC soon, followed than by three beeps and it turned off the ESC. Anyone have any ideas on this? I am going to go get the error code checked tonight, but any ideas off the top of anyones head on what the possible soultion would be? I would much appreciate that

Posted by Anonymous on

Ad

1 Answer

Rick M

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 4,056 Answers

This is pretty common and is usually caused by metallic particles stuck to the magnetic encoder on the wheel speed sensor. GM has issued a service bulletin about it.
Service traction system service ESC Ricks Free Auto Repair Advice

Posted on Nov 24, 2017

Ad

3 Related Answers

carl

  • 3640 Answers

SOURCE: 1996 Chevrolet pick up --

p0140 is 02 sensor ckt no activity ( bank 1 sensor 2). bank 1 sensor 2 is in back of convertor, it will need replaced it is sending wrong info to pcm.

Posted on Sep 17, 2010

Ad

Anonymous

  • 1 Answer

SOURCE: How to Turn off Service Traction Control and ESC messages

I had this problem with my 2007 HHR. I drove away with the service engine and the service traction light on. The car was stuttering through the gears. I took it back and they checked it. They disconnect some wires while they change the oil and one was loose. The service engine turned off but the service traction stayed on. We disconnected the battery for 3 minutes and it fixed the problem. Some of those other guys spent up to 300 dollars to fix the problem. Hope it works out for you.

Posted on Oct 01, 2010

Anonymous

SOURCE: The light ABS and ESC OFF is on all time on chevrolet HHR 2011 also the light with a draw of one car running in slipery floor

Needs to be diagnosed in a shop with the proper test
equipment --like all vehicle problems when dash lights come on

Posted on Dec 06, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 malibu died and service esc came on dash. now won't start. Does anyone know if this is an easy fix?


Does anyone know if this is an easy fix?????? Could be , but without doing some testing we'd only be guessing . You have no idea of the complexity of the electronic's on your vehicle. Hooking up a professional or factory diagnostic scanner should be first step in diagnostic procedure . Your best bet , have it taken to a qualified repair shop.

Jan 13, 2018 | Chevrolet Malibu Cars & Trucks

Tip

Ford service light procedure 1994-01


Windstar

1999-01

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the message center, press the SETUP control to access the System Check mode. Press and release the RESET button until IF NEW OIL HOLD RESET is displayed. Press and hold RESET button until OIL LIFE SET TO 100% is displayed.


Windstar


1997-98

To reset "CHANGE OIL SOON/OIL CHANGE REQUIRED" message on the Message Center, press "RESET" and "SETUP" controls at the same time. "OIL LIFE % HOLD RESET NEW" will be displayed. Press the "SETUP" control to access the System Check mode. Press "RESET" to start the system check. Press and hold the "RESET" control. Press "RESET" and "SETUP" to reset the system to 100%


Explorer,
Mercury
Mountaineer


1997-01

To reset the oil life feature on the Message Center, press and hold the "OIL CHANGE RESET" button until the system counts down (about 5 seconds). The Message Center will display "OIL LIFE RESET TO 100%"


Probe

with Analog Dash

1989-92

When "SERVICE" is illuminated on the Vehicle Maintenance Monitor on the overhead console, press the "SERVICE INTERVAL RESET" button located directly above the light.


Probe

with Digital Dash

1989-92

When "SERVICE" is illuminated on the Vehicle Maintenance Monitor on the overhead console, press the "SERVICE INTERVAL RESET" button located directly above the light.


Probe

with Digital Dash

1989-92

When "SERVICE INTERVAL CHECK" is displayed is displayed on the far left side of the instrument panel, press the "SERV OFF" button, located on the speed alarm keyboard, until three tones sound.


Thunderbird,
Mercury Cougar

with System Scanner

1986-88

When "SERVICE" appears on the Diagnostic System Scanner, press the "ODO SEL" and "TRIP RESET" buttons simultaneously. The "SERVICE" message will go out and three short beeps will be heard when the system is reset.


Thunderbird,
Mercury Cougar


1989-94

If "CHANGE OIL SOON" or "NOW" is indicated on the Monitor, turn the ignition on, but do not start the engine. Within 16 seconds, insert a paper clip into the cavity to the left of the display and depress. The display will flash; when it stops, the system is reset.















on Dec 07, 2009 | Ford Windstar Cars & Trucks

2 Answers

Engine management light on car runs fine


Service engine soon or check engine light? Engine light needs scanned for codes. Service engine soon is for oil changes and such. To get rid of service lights, turn the key on, press the gas pedal three times within five seconds. The light will flash. turn the key off. it's reset. At least check or change the oil and filter though.

May 30, 2015 | Cars & Trucks

1 Answer

Beeping sound in 2005 nissan murano


Mine did the same thing. I had the battery replaced on the controller.and it still beeped. Then I took my key and put it in the ignition, without turning the key and took it out. Did this like 6 times and the long beep finally stopped.

Apr 07, 2013 | 2005 Nissan Murano

2 Answers

What does it mean when the dashboard reads gear indicator fault, service ride control and change oil soon even after i just got it changed along with service vehicle thats what keeps popping up on my dash...


Off the top of my head the following may be the case for your 1995 Cadillac Deville based on my 1997 Cadillac Deville knowledge:

gear indicator fault- has to do with the shift lever sensor down on the column by the feet,

service ride control- has to do with the air ride shocks in the back or the compressor in the front or the ride control height,

change oil soon- has to do with not resetting the % oil life (just press reset button for a few seconds when the oil % life is displayed)

Hope this helps you out.

Aug 29, 2010 | 1995 Cadillac DeVille

1 Answer

Steady Service Engine Soon light is on the Dash Board. How to fix


YES. IT MAY TAKE SEVERAL STARTS TO CLEAR THE CODE AND TURN THE LIGHT OUT. OOORRRR , YOU COULD REMOVE THE NEGATIVE FROM THE BATTERY FOR 10 MINUTES THEN PUT IT BACK ON AND YOU SHOULD BE BACK IN BUSINESS . GOOD LUCK.

Apr 22, 2009 | 2000 Cadillac Eldorado

1 Answer

Staedy Service Engine Soon Light is on Dash board, How To Fix this Problem?


yes and no disconnect the battery both sides, now without touching the battery touch black to red wires, this resets any codes. if the light comes back on you will need a pcm scan to get any error codes from it.

Apr 22, 2009 | Cadillac Eldorado Cars & Trucks

2 Answers

Service engine soon light is on.


  1. Take apart the dash.
  2. Locate the lightbulb for the service engine soon light.
  3. Remove it.
  4. Replace dash.
  5. Enjoy your worry-free driving experience.

Jul 22, 2008 | 2004 Pontiac Grand Prix

7 Answers

2006 Sonata ESC Off Light


I had the same problem at 35,000 miles. I would be driving and suddenly the ESC Off Light would illuminate. It would disappear if the car was turned off, only to reappear after a few miles of driving. It turned out to be a faulty "brake light switch."

Jul 12, 2008 | 2006 Hyundai Sonata

Not finding what you are looking for?
2011 Chevrolet HHR Logo

Related Topics:

728 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23515 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...