Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Feb 03, 2013

Honda Accord Washer nozzle adjustment - Accord Honda Cars & Trucks

2 Related Answers

fyrebyrd1

Evan Jenson

  • 122 Answers
  • Posted on Oct 21, 2008

SOURCE: 92 honda accord camber adjustment

There is no no camber or caster adjustment on that model. If the car has been in an accident, chances are something is bent. My experience has been that the shock body and/or the steering knuckle is bent. Parts replacement is the only true fix. If the vehicle has had the ride height altered, ie. lowering springs, then there are adjustable upper control arms and ball joints available. These do generally only address the camber angle, not caster, which can also greatly affect handling. hope this helps.

Ad

marionbagget

  • 718 Answers
  • Posted on Mar 22, 2009

SOURCE: Washer motor in 97 Honda Accord quit working

You can get a replacement from
1)junkyard, 2)autoparts store, or 3)dealer
Look for the pump below the washer reservoir. Look behind the cowling in the wheel well.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Replace rear washer nozzle on 2007 crv

did you mean NOW to? or who sells them or?
the dealer sells the parts
the same dealer has the service manual to cover that.
or google it. zillions of cars and more nozzles.
youtube it.?
most nozzles just snap off.
HONDA?
CR-V

the front nozzle is threaded plastic + nut, and unscrews CCW
rear. Honda name back glass nozzle
76850-SWA-305 the rear one snaps off just like seen here (googled)

https://www.carid.com/2007-honda-cr-v-washer-nozzles-components/
0helpful
1answer

How to adjust the aim on my projector headlights for 2008 honda accord sedan?

There are adjusters that are normally labeled u/d along front of car or on fenders or back of headlight. Found this video. I didn't watch it tho
2008 8th gen Honda Accord DIY how to adjust your headlights


If you need further help, reach me via phone at https://www.6ya.com/expert/chris_4155bd1205f4fa2f


0helpful
3answers

How do I adjest the front struts on a 99 Honda Accord

go google and type in-- front struts on honda accord 1999 model --and there is a video on youtube .com that shows you how to do ti
0helpful
1answer
4helpful
3answers

How do you fix low pressure on windshield washer fluid sprayer.

Its just plugged up, probably right at the nozzle it's a pretty tiny hole. To clear it out you need to find a small diameter wire that will fit inside the hole to clear the blockage. Something like a small gauge sewing needle or a straight pin. It can also get plugged up in the rubber tubing. Usually you can just blow through it with lung power. Just pull the tube off at the nozzle and run the washer this will tell you if it's the nozzle or the tubing.
0helpful
1answer

Drivers side windsheld washer hits to low on windshield

Take a needle and insert it into the windshield washer nozzle, and adjust to the correct position.
0helpful
1answer

Drivers side windscreen washer not working passengers side weak

check for a leak in the hose going to the washer nozzle or the nozzle could be clogged.
0helpful
1answer

Washer motor in 97 Honda Accord quit working

You can get a replacement from
1)junkyard, 2)autoparts store, or 3)dealer
Look for the pump below the washer reservoir. Look behind the cowling in the wheel well.
0helpful
1answer

Wiper fluid dosnt spray when hood is down. 1991 honda accord lx

It has to be pinching the tube when you close hood. Replace tube since it is cheap hose and see if it came lose from or is missing a mount to hold the hose.
Not finding what you are looking for?

62 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...