Question about 1996 Jeep Grand Cherokee
Where is the keyless remote receiver on my 1996 jeep cherokee?
On my cherokee its in the dome light housing google it
or google grand cherokee forums
Posted on Feb 07, 2013
The little blade lock will lift up. see image..."http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/0a/9d/4c//medium/0900c152800a9d4c.gif"
Posted on Sep 30, 2008
That remote should not be able to be programmed by you, it needs to be programmed by the dealer using their computer. I know that some later and earlier models can be programmed by the user, but I did some research on this as i have a 96 as well and it seems the 96 was a dealer computer thing. If you in fact bought the remote from the dealer they should be willing to program it for FREE. Otherwise I was given a $30 estimate for the programming.
Posted on Dec 12, 2008
Tips for a great answer:
Unlock all of the Jeep Grand Cherokee's doors and open the driver's side door. Keeping the door open, lock it using the manual lock on the door itself.
Put the manual key into the ignition and switch it to the "On" or "Run" position, whichever applicable, without starting the engine.
Point the remote at the receiver (located by the little bulb on the car ceiling) and hold down the "Lock" button for up to 5 seconds.
When the driver's side door unlocks, you know the remote has been programmed correctly. If you are only programming one remote, jump to the next step. If not, manually re-lock the driver's side door and repeat steps 5 and 6 using each remote you would like to program and then continue.
Turn the key to the "Off" position and turn the ignition on immediately. This must be done within 20 seconds of programming the last remote. You're finished!
Feb 11, 2013 | 1996 Jeep Grand Cherokee
Jun 23, 2012 | 1996 Jeep Cherokee Country
Jan 17, 2012 | 1998 Jeep Grand Cherokee
Apr 17, 2010 | 1994 Jeep Grand Cherokee
Aug 04, 2009 | 2001 Jeep Cherokee
May 28, 2009 | 1996 Jeep Grand Cherokee
Dec 07, 2008 | 1996 Jeep Grand Cherokee
284 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: