Question about 2005 Jeep Grand Cherokee
When I press the heated seat buttons for either the passenger or driver seats the indicator does not light up nor do the seats heat up. Could this be as simple as a fuse? I have looked in the owners manual and can't seem to find where that fuse might be. Hey thanks for any help you might have for me.
i actually removed my 2 front seats very easily as a novice. There really is only i think 4 bolts that need to come out 2 in front and 2 in back. If i can remember correctly i believe it was a larger metric size. Although i dont have power seats, if you do just look for the clip connector and disengage
Posted on Jul 07, 2008
I had the same problem. Drilled a hole in the round plastic extension beneath the glove box, behind the carpet. Now run a coat hanger through it, followed by alot of compressed air. It may take several times, debri from above may be continuosly replugging drain. when you are done, clean thoroughly, and patch with hot melt glue. Good luck.
Posted on Sep 16, 2008
Fuse # 20, located in the Junction Block (interior, drivers side). This is a ten amp fuse.
Read the information at the above site. The TSB (technical service bulletin) may be of interest to you.
Posted on Nov 20, 2008
C1 & C2 in your panel are most likely one of the culprits, if no power at heater at seat. Sounds like testing for power at seat switch is easier to do than get at these circuit breakers in the panel. If you have power at switch at seat, then it's not the fuse/circuit breaker. Good reading at this link for you.
Posted on Dec 29, 2008
Tips for a great answer:
Mar 24, 2018 | Ford Cars & Trucks
Feb 19, 2017 | 2005 Jeep Grand Cherokee
Feb 12, 2012 | Jeep Grand Cherokee Cars & Trucks
Jan 25, 2011 | 2005 Jeep Grand Cherokee
Jun 16, 2010 | 2001 Jeep Grand Cherokee
Feb 28, 2010 | 2002 Jeep Grand Cherokee
Dec 13, 2008 | 2002 Jeep Grand Cherokee
Dec 11, 2008 | 2001 Jeep Grand Cherokee
Oct 31, 2008 | 2001 Jeep Grand Cherokee
465 people viewed this question
Usually answered in minutes!