1996 Dodge Intrepid Logo

Related Topics:

Anonymous Posted on Jan 30, 2009

96 dodge intrepid,

No power to dist coil

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 16 Answers
  • Posted on Feb 01, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Feb 01, 2009
Answers
16
Questions
0
Helped
3628
Points
22

Might just be a bad connection or corroded connection at the coil or the crankshaft sensor. Also could be crankshaft sensor is bad. Start with moving the connector while someone turns it over for you. Also see if your tachometer registers at all during cranking.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Dtc Code P2314

2002 Dodge Intrepid Ignition Coil Circuit Codes: Electrical ...

www.2carpros.com/.../dodge-intrepid-2002-dodge-intrepid-ignition-coil...
Aug 13, 2008 - 2002 Dodge Intrepid 6 cyl Front Wheel Drive Automatic 130000 miles. Getting the following codes. P0353 P2302 P2305 P2308 P2311 P2314

What are 2002 Dodge Intrepid trouble codes PO442 and ...

www.answers.com > ... > American Cars > Dodge > Dodge Intrepid
What does the Error Code P0846 on 2002 Dodge Intrepid mean? .... Trouble code P2314 means: Ignition coil E, secondary circuit - malfunction Trouble code .
0helpful
1answer

My 96 Dodge Intrepid will not start. When it does it will only run for a minute or two and then die. I have changed the ignition coil and it is still doing the same thing.

A failing fuel pump will do this.
Check the fuel level.
A weak pump will not work well below 1/3 tank of fuel.
==== Clean air filter will help rule out air restriction problem.
1helpful
2answers

96 intrepid not fireing have tried resetting the timeing no codes were found new coil pack all connections r good what do i do next

i got a1996 dodge intrepid 3.5 L .the spark plugs 1,3,2 works but 4,5,6 do not work. i changed the spark plug wires, the coil ,the crankshaft sencer and the camshaft sencer.what else could cause this not to start?
0helpful
1answer

I have a 96 dodge intrepid 3.5 and it has intermittent spark. tries to start but just won't

Change plugs and wires, also check coil. Take a plug out, reattach to wire, and place threads of plug on block, or other ground, then have someone start it, and see if you get a good strong spark, if so, everythings ok, if not, replace plugs wires or coil
0helpful
1answer

96 intrepid and not getting fire?

hope to be some help, it sounds like the car aint geting any gas,my advice is too check the gas line & fuel pump...let me knw how it go...
0helpful
1answer

96 dodge intrepid without heat or power windows

Check all the fuses including the ones under the hood. If there's an alarm it could be malfunctioning, seen that a million times. The body control module is often affected by after market alarms. This would cause many of your issues.
0helpful
1answer
2helpful
1answer
0helpful
3answers

'96 Dodge Dakota will crank, but won't run.

a bad crank sensor or dist pickup plate can cause this.... check the fuses in the fuse block under the hood for any blown ..... a bad auto shut down relay may cause it .....try putting a test light on the green and orange wire and see if it lights up when you try to crank it
Not finding what you are looking for?

132 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...