SOURCE: can you discribe the proceedure to replace the
front wheel bearing comes as complete hub assembly remove brake calliper and brake disc remove drive shaft nut at the back of hub housing there are some bolts wire brush this area well use penetrating oil remove the bolts tap hub out of housing can be tight so take your time clean housing well then fit new hub secure bolts fit and tourqe up hub drive shaft nut fit disc and calliper
SOURCE: right rear wheel bearing noise 1988 volvo bertone
It could be drive shaft joint. the car is rear wheel drive with independant suspension. I do not think there is a bearing there. It may also be the brakes need replacing.
SOURCE: i replaced the rear wheel bearings in my 2006 abs light is still
You will have to have the ABS system scanned for codes and go from there.
SOURCE: replaced rear wheel bearings 2006 Volvo S60 and ABS lite stays on
Make sure the abs sensor is plugged in all the way.. And also make sure that the abs ring.. was not damaged in the process of putting on the new bearing...
SOURCE: How is front wheel bearing replaced on a 2001 Volvo S40?
most front wheel bearings are pressed in you half to take the whole control arm off pull out the hub press out the bearing grease the new one and press it in its best to take it to a machine shop do not try pressing it in yourself
677 views
Usually answered in minutes!
×