Question about 2006 Mazda 3

1 Answer

I have a 2006 mazda 3 hatchback and I have a loud noise on the passenger side that I used to think was jus the tire rubbing but it's not and sometimes the noise travels to the drivers side and whe

Posted by aricasunny_3 on


1 Answer

Eric Lowther

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 11 Answers

Is it a clicking noise when ur turning a corner if so its your cv

Posted on Oct 08, 2017


2 Related Answers

chris quammen

  • 811 Answers

SOURCE: looking for front end parts diagram for 2006 mazda tribute

buy manual, clean or replace speed sensor at wheels

Posted on Sep 13, 2009



  • 1 Answer

SOURCE: Passenger window won't work using the driver side control switch

Open the window with the local button and keep the button pressed for 3 seconds after it has fully opened. Then close the window and keep the button pressed for 3 seconds after it has fully closed. This calibrates the position of the window which it lost when you changed the battery. Good luck

Posted on Apr 01, 2010

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Loud grinding/clunking noise when driving, lessens when I press the brake

Loud Noise Unknown Origin - Ask the GM Technician - > ... > Ask the GM Technician

Jun 30, 2006 - 7 posts - ‎3 authors
I get a loud clunking, grinding noise while turning to the right only, and ... I moved the passenger side tire to the rear driver side just in case it ...

can bad wheel bearing/hub cause loud clunking noises?

Nov 12, 2009 - 14 posts - ‎6 authors
driving home, i noticed some metal clunking sounds coming from the front driversside. at ... hmmmm....if it's grinding, then probably a bearing.

Front Clunking sound when driving straight. - TDIClub Forums > ... > VW MKIII-A3/B4 TDIs
Dec 21, 2011 - I have a sporadic clunking noise from the drivers side front end. '98 jetta ... If I try to coast it gets really louder and more pronounced. ... whirring orgrinding could be several things: wheel bearing, brake pads due to a caliper ...

Quick Guide to Diagnosing Differential & Driveline Noises ...

Dec 26, 2015 | Cars & Trucks

1 Answer

Squeaks in the steering column when turning. grind when turning in reverse just started.Steering pump or rack & pinion?

Same thing with my 05 cobalt sedan mechanic jacked car up to removed tire from passenger side or one and my tire fell lop sided! He did not even touch anything so he removed tire and "knuckle" was snapped clear thru!! He explained knuckle is part that connects strut and wheel hub together I believe he tried explaining it to me so part alone is $300 he told me yikes but my car had every one of the problems exactly to a tee it's been making weird noise for awhile but grinding,rubbing,squealing real loud in reverse onlystarted a five days before checked I hit pothole but do not think that was when it started plus I drove it after that just didn't use reverse had no idea it was that serious of a pro lemme cuz didn't affect car except in reverse it's been a weird noise low since 3 wks after I got it dealer kept telling me itso the way brakes sound ok!! Have someone remove tire and check that it sounds just like it may be

Jul 17, 2015 | 2010 Chevrolet Impala

1 Answer

Anti lock brakes activate and make loud rubbing and clicking noise on normal stops on cold days (less than 40 degrees).

If the issue goes away when the car is hot, then it's likely not a sensor issue. Check the brake caliper for free moving and check the caliper's pistons to make sure they aren't seized.
Check the condition of the brake disk and pads.

Nov 03, 2012 | 2006 Nissan Quest

1 Answer

Very loud "rubbing " sound when driving only

you did damage to the wheel bearing i bet it sounds like a airplane sound. also if you steering wheel is off 7"then have front end aligned because this will destroy the tires and they will make noise.

Mar 29, 2009 | 2006 Dodge Stratus

2 Answers

Mazda 3 tail light on, brake light not on

The bulb actually has two seperate elements in it.
That is why the tail light works fine.

If you take the bulb out you will see the seperate elements.
Change the bulb and it should be fine.

Jan 09, 2009 | 2004 Mazda 3

1 Answer

Rubbing/squealing noise in front passenger side wheel well

Repeat the experiment and rotate wheels at same time. Might be just coincidence and it is actually a belt. My guess would be power steering.

Dec 28, 2008 | 2006 Chrysler Sebring

Not finding what you are looking for?
2006 Mazda 3 Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6495 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides