At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have four O2 sensors in your vehicle. Bank 1 and Bank 2. Typically it is Bank One, sensor Two that goes out from minor oil leaks on your engine. Here are a couple diagrams. Lay down behind your right front tire and look up. Look for cracked wires or burnt areas by connection. You can't always tell by looking. Easy to replace and fairly cheap.
GM products have 4 O2 sensors attached along the exhaust pipes coming off the manifold. Bank 1 is aligned to cylinder 1 on the engine which is the driver's side. Sensor 2 is the one after the convertor (Sensor 1 being the one before the convertor). Link attached for more information.
both are o2 sensor problems and should be related to each other p0151 -o2 senson malfunction bank 2 sensor 1[ which would be the sensor on the no.2 cylinder side ---before the cat conveter --the p1153 o2 bank 2 sensor1 insuffent switching --its the same o2 sensor -check the wiring and connection if good- than replacement of the o2 sensor is dvised
Hi, There are 4 sensors, 2 pre catalytic converter, 2 post. The driver side is bank 1, and the passenger side is bank 2 .The foreward one in the pipe coming from the driver side is bank1 sensor 1, the rear sensor for the driver side is bank 1 sensor 2 . The other side would be the same, but bank 2. Good luck...
Need more information but here is where all your O2 sensors are located
Bank 1 Sensor 1 - Driver's side, before catalytic converterBank 1 Sensor 2 - Driver's side, after catalytic converter Bank 2 Sensor 1 - Passenger side, before catalytic converter Bank 2 Sensor 2 - Passenger side, after catalytic converter Thank you for using fixya and good luck
po420 code wat is realated to pls help
1997
×