While changing the belt on the alternator got everything changed drove about 40 miles and heard a funny sound then the battery light came back on and when we got home a circle piece that is dirrectly behind it one that the belt is on fell off what is the name oof that part and how do you replace it
SOURCE: #5 cylinder misfire
I have a corolla and had #4 cylinder misfire also diagnosed at autozone. After changing the spark plugs, problem persisted, along with the same error code, so they recommended changing the spark plug wires, and that is what fixed it. I would have changed the rotor cap too, but was low on dough. Glad that was not the problem.
SOURCE: my hold light is flashing in my 2001 mazda millenia
hold light flashing means you have a transmission fault of some kind, check vehicle speed sensor
SOURCE: 2002 mazda protege5 auto battery light coming on
I'm guessing that you've tested the actual current output of the alternator then. I'm assuming that the output is between 13-14Volts at the battery when the car is running... If it's too low, then it's not charging your battery at all, too high, and it's frying your battery.... Another thing that can cause this is if you have a short in your electrical system.. that, however, will be difficult to narrow down...
SOURCE: Mazda Millenia 1997...flashing hold light when
you mean check engine light flashing??? if so then the engine is skipping and the lack of power putput will cause the trans to change gears constantly. is this the issue you describe?
Testimonial: "Thankyou for taking the time to answer my questions....cheers"
SOURCE: how do you change an alternator belt on a 2001
1.6L (Zm) Engine
Refer to the illustration for component location.
To install:
Location of the alternator mounting bolts and adjuster bolt D–Protégé 1.6L (ZM) engine
2.0L (Fs) Engine
Refer to the illustration for component location.
To install:
Alternator belt tension adjuster bolt (C)–Protégé 2.0 L (FS) engine
108 views
Usually answered in minutes!
×