Question about 1997 Dodge Avenger

Open Question

1997 dodge avenger spark plug wire diagram

V-6 spark plug wire diagram 1997 dodge avenger

Posted by Anonymous on


6 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 512 Answers

SOURCE: 2001 dodge ram 1500 v8 spark plug wire diagram

the firing order is 1 8 4 3 6 5 7 2 clockwise around the cap

Posted on Jan 03, 2009


Ronnie Wilson

  • 1596 Answers

SOURCE: need wireing diagram for 2002 dodge grand caravan

------>>>FRONT>>>>of Van >>>>

#5 cyl #6 cyl

#3 cyl #4 cyl

#1 cyl #2 cyl
I #3 #1 #5 I
I I Firing Order Is
I I 1 2 3 4 5 6
I #6 #4 #2 I
I _______________I_

the Wires Go Accordingly to prospective Terminals, So Sorry Unable to Send Pics through FixYa, A Formating Problem Exists
and they show on my end but not on your end this is TRUE and CORRECT To The BOOK other than the Lines from Coil to Spark Plug ENDS at CYLINDERS. Please dont Forget to RATE Me
Thank You And Happy Motoring!!

Posted on Mar 27, 2009

Dennis Yachimec

  • 79 Answers

SOURCE: Need spark plug wire to distributor diagram for 2000 dodge ram

Here is a diagram.93009452.gif

Posted on Apr 09, 2009


  • 43 Answers

SOURCE: How hard is it to replace the water pump on a 1997

c6f48b0.gif The pump is driven by the timing belt so you basically need to take the front of the motor apart. It is quite a job to get at it but is doable. If you are going to do the job I'd suggest changing the timing belt, tensioner pulleys and the cam and crankshaft seals as well, may as well do some preventative maintenance while it is apart. I've got the whole proceedure and will make u a copy if you want.

Posted on Nov 23, 2009


Mike Butler

  • 6674 Answers

SOURCE: I just changed the spark plug wires on my 1997

a72cd93.jpgWill this help?

Posted on Nov 28, 2009

Testimonial: "Thank You!!!!!"

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a 1997 dodge average 2.5 v6 24 value its not getting spark to plug wires have replaced crankshaft positioning sensor and still no spark please help.

You need to check wiring first. After that would be the ECM. You need wiring diagrams/pinouts and a volt/ohm meter.

Apr 05, 2015 | 1997 Dodge Avenger

1 Answer

I have a 1997 dodge avenger 2.5 V6 I pulled the distributor out to replace with a new one and did not mark the position of the rotor do I make sure I have the new rotor button in the corr

You would have to find the number one spark plug Remove the wire and plug. Manually turn the motor over to the compression stroke. Insert the distributor so that the rotor generally faces the number one plug.

Jan 29, 2014 | 1997 Dodge Avenger

1 Answer

Order the plugs go on the motor

1997 Dodge Avenger 2.0 liter DOHC L4 VIN "Y"


1997 Dodge Avenger 2.5 liter SOHC V-6 VIN "N"


Hope this helps.

Aug 15, 2011 | 1997 Dodge Avenger

1 Answer

Replacing spark plugs

you would need to get the right spark plugs, remove the wire to the plug one at a time, remove the old plug, install the new one and replace the wire

Dec 03, 2009 | 2008 Dodge Avenger

2 Answers

Need a spark plug wiring diagram 1997 dodge ram 2500

the 2500 in 1997 came with a 5.9 v8 or a diesel cummins 6cyl
the firing order should be on the intake manifold

May 27, 2009 | 1997 Dodge Ram 1500 Club Cab

4 Answers

Anything positive on 97 Avenger?

Tune up (plugs,wires,and distributor cap) was done on a '97 Dodge Avenger with the 2.5l engine because it wouldn't start. It ran for 1 day after the tune up,but will not start now. No spark at the plugs. Any suggestions? Thanks

Feb 17, 2009 | 1997 Dodge Avenger

4 Answers

2008 dodge avenger spark plug location and socket size.

  • 2008+ Dodge Avenger 2.4L 4cyl.
  • Remove plastic cover on top of engine, just pull on each corner for it is friction fit.
  • Once removed you will see 4 black spark plug covers with one hex type screw holding each.
  • Remove Hex screw and place aside, pull upward to remove plug boot from plug.
  • To remove the plug, use a 5/8 socket with a 6" extension. Once plug has been turned out all the way and you cannot get the plug up and out of the hole, just press the plug boot back on the plug and pull it back up.
  • Gap and replace 4 plugs with the same or equavalent type,. Drop plug down the hole and use socket to align and tighten until just snug, then torque to manufactures specifications.

Feb 14, 2009 | 2008 Dodge Avenger

Not finding what you are looking for?
1997 Dodge Avenger Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides