There are many reasons that light could be on. You either need to get an OBD2 meter at an auto supply place and follow the instructions to get the error codes indicating what are possible causes or go to an auto repair shop and have them look it up.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your onboard computer is letting you know that it has detected an electrical problem in your four wheel drive circuits that requires attention. It could be a loose wire, or corroded connections or a switch gone bad. I'd check the connections and wiring first.
If the warning light is on, either someone did not clear the codes, or the problem still exists. An auto parts store should be able to scan the computer and turn off the light.
Hi, check all tire pressures, they need to be as close as possible to what the door panel/jam list for recommend inflation psi. If not this service tire monitor will light on dash.
Unfortunaltly you can't turn the light off unless the repair is made. It is a safety feature. And yes, the little monitor inside the rim has gone bad or cracked. These are easily replaced by a tire technision, but the cost of the (TPMS)tire moniter is pricey.
U can take the vehicle to an Auto parts store and they will check for stored codes and go from there. With the gas gauge it could be fuse or sending unit.
×