Right side wing mirror

Question edited for clarity and toss in some CAPS.
Question moved to model category.

Exterior Mirror Replacement Glass for CITROEN C2 (2003 ...

Amazon.ca https://www.amazon.ca > Exterior-Replacement-CITR...

1.Remove all existing mirror glass from the mirror assembly plastic backing plate. 2.Clean the backing plate with rubbing alcohol and clean the back of the new ...
$70.50 · ‎In stock

Car Wing Heated Mirror Glass Lens, for Citroen C3 ...

Amazon.ca https://www.amazon.ca > Heated-Mirror-Glass-Citroen...

Easy to install: The damaged mirror can be replaced directly, and an alternative to replace the entire mirror housing is provided. If you have any questions, ...
$69.05

Low Price Guarantee on citroen c3 picasso Wing Mirror ...

Car Door Mirrors https://www.cardoormirrors.com > citroen > c3-picass...
Low Price Guarantee and Free Delivery on High Quality citroen c3 picasso Wing Mirror Glass, Replacement citroen c3 picasso Wing Mirrors and Stick on Mirror ...
£4.99 Videos
..

Instructions
1


Disconnect your negative battery cable, if your Ford Focus has power side mirrors. If it has manual side mirrors, disconnecting the battery is unnecessary.

2


Pry off the wing mirror's inside sail panel (shaped like a triangle). Insert a trim panel tool between the door skin and the plastic panel to pry it off.





3


Carefully pull the sail panel away, minding the wiring if the mirror is power-operated. Unplug the electrical harness and set the panel aside.

4


Open the door and hold the outside part of the wing mirror steady. Remove the mounting bolt with a socket wrench, and then remove the mirror screw with a Phillips screwdriver (the mirror bolt and screw is visible with the panel removed).

5


Pull the wing mirror assembly from its mount (from the outside). Insert the replacement mirror assembly in place; tighten the bolt and the screw.

6


Attach the wiring connection to the replacement mirror. Position the sail panel in place and push it against the door to snap it back on.

You have to remove the sail cover that's on the opposite side of the mirror. It is held on by just some plastic lips on the edges. Pry off carefully. There is one speed nut at the very front of the mirror and one large nut in the center. That's it. Don't drop the big nut into the door panel.

Check this guide as reference for solve ypur problem; this is one DIY about replace Wing Mirror...
1.- Disconnect your negative battery cable, if your Ford Focus has power side mirrors. If it has manual side mirrors, disconnecting the battery is unnecessary.
2.- Pry off the wing mirror's inside sail panel (shaped like a triangle). Insert a trim panel tool between the door skin and the plastic panel to pry it off.
3.- Carefully pull the sail panel away, minding the wiring if the mirror is power-operated. Unplug the electrical harness and set the panel aside.
4.- Open the door and hold the outside part of the wing mirror steady. Remove the mounting bolt with a socket wrench, and then remove the mirror screw with a Phillips screwdriver (the mirror bolt and screw is visible with the panel removed).
5.- Pull the wing mirror assembly from its mount (from the outside). Insert the replacement mirror assembly in place; tighten the bolt and the screw.
6.- Attach the wiring connection to the replacement mirror. Position the sail panel in place and push it against the door to snap it back on.

Hope helps (remember comment and rated this). TY for using Fixya.

Hello Darren, there is not special tools required.Just open the plastic cover from inside/against the mirror and you will see 2 or 3 bolts with 5 mm Allan key head.Good luck

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can remove the bolts securing the mirror to the door.

take off the plastic cover on the upper forward corner of the door, you will see three bolt studs with nuts..Remove the nuts, pull the mirror out enough to disconnect the electrical connector.

on the inside of car remove plastic triangle then you will find 3 screws remove these and refit

1. Disconnect the negative battery cable.
2. Remove the outside rearview mirror garnish.
3. Disconnect the harness connector.
4. Remove the 3 bolts and the outside mirror.

To install:

1. Install the outside mirror and tighten the bolts to 60 inch lbs. (7 Nm).
2. Connect the wiring harness.
3. Install the mirror garnish.
4. Connect the negative battery cable

There is a black plastic cover on the other side of the mirror, take it off make sure you have the wires long enough to splice back to you will be able to see all the bolts that need to come off to replace the mirror. You will be able to figure out the rest it is very simple