It is for a Ford f250 super duty 2005 year model
Remove Cab bolts and lift body with lift. If lift is not accessible then remove mount bolts on one side and jack with block of wood to reduce body damage possiblity (Use body line). Jack body just high enough to remove bushing. Use caution watch hands and avoid pinch points whenever possible.
Where can l find the busings/mounts?
Just need the rear.
×
SOURCE: Fuse panel diagram for 2003 - F250 Super Duty -
I beleive the diagram is on the inside of the plastic fuse cover, mine is.
SOURCE: abs light on
I'm a Ford service adviser. There are many reasons for the
abs warning indicator to come on. The usual cause is from a
faulty speed sensor. Either a wheel speed sensor or the
differential speed sensor. I don't think the light is related to your
vandalism. You might want to take the truck to an auto parts store and
have them read the codes for you. Most auto parts stores will do this
for free.
Good Luck
SOURCE: fuel leaking from ford f250 1999 super duty v8, 7,3 truck
check the high pressure return line behind the fuel filter the clamp securing it will vibrate and rub a hole in the line. i was quoted a couple of hundred to replace the line, i put a small piece of fuel line over the hole and secured it with a worm gear clamp. no leaks in over 2 years
SOURCE: My horn does not work on my 2003 Ford f250 super duty PU truck.
The horn location is on the radiator support.
1,409 views
Usually answered in minutes!
×